IoT Controllers

Milesight UC300-L05EU is an industrial IoT controller in the cellular 4G LTE Cat.1version, designed for remote data collection, monitoring and control of devices equipped with various industrial interfaces. The model offers 4 digital inputs, 2 relay outputs, 2 4–20 mA inputs, 2 0–10 V inputs, 2 PT100 RTD inputs, RS232 and RS485 with Modbus RTU. Variant L05EU is intended for the EMEA region and supports LTE FDD B1/B3/B7/B8/B20/B28A, WCDMA B1/B8 and GSM/EDGE B3/B8.

The controller can communicate directly with higher-level systems via TCP, UDP, MQTT, AWS, Milesight IoT Cloud and SMS, so no LoRaWAN® gateway is required. Support for IF-THEN rules and threshold alarms enables local automation actions even during temporary network connectivity loss. UC300-L05EU is powered with 5–24 V DC, operates at a temperature of −20…+60°C, has a metal IP30 enclosure and can be mounted on a desktop, wall or DIN rail.

Milesight UC512-DI-868M, PN: EA is a battery-powered LoRaWAN® solenoid-valve controller designed for irrigation automation and remote water-flow monitoring. The variant 868M supports the EU868, IN865 and RU864 bands, while the EA version has an external antenna connector SMA 50 Ω. The device offers 2 outputs for controlling 2-wire 12 V DC latching valves and 2 digital inputs operating as Digital Input or pulse counter, enabling operation with pulse water meters, among other devices.

UC512 is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each, providing, according to manufacturer data, more than 10 years of operation in LoRaWAN® Class A mode under specified test conditions. The controller supports OTAA/ABP Class A and Class B, NFC configuration, local rules and multicast. The sealed enclosure IP68, temperature range −30…+70°C and wall or pole mounting enable the device to be used in year-round outdoor installations.

Milesight UC502-N03GL is a battery-powered multi-interface IoT controller using cellular communication LTE Cat M1 / NB-IoT NB2, designed to integrate wired sensors, meters and industrial devices without requiring a LoRaWAN® gateway. Model N03GL is the global variant and offers 2 × GPIO, 2 analogue inputs 4–20 mA / 0–10 V, switchable RS232/RS485 with Modbus RTU, interface SDI-12 V1.4 and 3,3 V and 5/9/12 V power outputs.

UC502-N03GL has internal cellular antenna and slot Nano SIM 4FF, and can transmit data via TCP, UDP, MQTT or AWS. The controller is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each or with external voltage 5–24 V DC. It supports threshold alarms and value-change alarms, cumulative reporting and local storage of up to 10 000 records with data retransmission. The enclosure IP68 and temperature range −30…+70°C enable operation in demanding field installations.

Milesight UC502-868M, PN: EA is a battery-powered multi-interface LoRaWAN® IoT controller designed to integrate wired sensors, meters and industrial devices in field installations. It offers 2 configurable GPIO ports, 2 4–20 mA or 0–10 V analogue inputs, switchable interface RS232/RS485 with Modbus RTU support and SDI-12 V1.4. Variant 868M supports EU868, IN865 and RU864, while the version EA has an SMA Female 50 Ω for an external LoRaWAN® antenna.

UC502 is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each or externally with voltage 5–24 V DC. The controller supports LoRaWAN® OTAA/ABP Class A, threshold alarms and value-change alarms, local data storage and retransmission of stored measurements. The sealed enclosure IP68, operating temperature range −30…+70°C, configuration via NFC and USB Type-C and wall or pole mounting allow the device to be used in demanding telemetry, agricultural and environmental systems.

Milesight UC501-N03GL is a solar-powered multi-interface IoT controller using cellular communication LTE Cat M1 and NB-IoT Cat NB2, designed to integrate wired sensors, meters and industrial devices without requiring a LoRaWAN® gateway. The global variant N03GL has an internal antenna, Nano SIM slot and 2 × GPIO, 2 analogue inputs 4–20 mA / 0–10 V, switchable RS232/RS485 with Modbus RTU, interface SDI-12 V1.4 and 3,3 V and 5/9/12 V power outputs.

UC501-N03GL uses 2 rechargeable ICR18650 batteries with a capacity of 2550 mAh each, built-in solar panel 6 V / 1,7 W and an external power option 5–24 V DC. Data can be transmitted via TCP, UDP, MQTT or AWS, while the Cumulative Report, Threshold Alarm, Change Alarm functions and local recording to 10 000 records help reduce the number of transmissions and ensure data continuity. The enclosure IP68, operating temperature −20…+60°C and NFC configuration allow the controller to be used in demanding autonomous field installations.

Milesight UC501-868M, PN: EA is a solar-powered multi-interface LoRaWAN® IoT controller designed to integrate wired sensors, meters and industrial devices with wireless IoT infrastructure. The device offers 2 × GPIO operating as Digital Input, Digital Output or Pulse Counter, 2 analogue inputs 4–20 mA / 0–10 V, switchable RS232/RS485 with Modbus RTU, interface SDI-12 V1.4 and 3,3 V and 5/9/12 V power outputs. The variant 868M supports, among others, EU868, while the version EA has an SMA Female 50 Ω connector for an external antenna.

UC501 uses built-in 6 V / 1,7 W solar panel, 2 rechargeable ICR18650 batteries with a capacity of 2550 mAh each and external power option 5–24 V DC. It supports LoRaWAN® OTAA/ABP in modes Class A and Class C, multicast, threshold alarms and value-change alarms, local storage of up to 600 records and data retransmission. The enclosure IP68, operating temperature range −20…+60°C, configuration via NFC, USB Type-C or downlink and wall or pole mounting allow the controller to be used in autonomous field installations.

Milesight UC512-DI-868M is a battery-powered LoRaWAN® solenoid-valve controller with internal antenna, designed for smart irrigation, remote flow control and water-consumption monitoring. The device offers 2 outputs for 2-wire 12 V DC latching valves and 2 Dry Contact digital inputs, which can operate as Digital Input or Pulse Counter. The variant 868M supports, among others, the European EU868 band, offering transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

The controller is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each, providing, according to the manufacturer, more than 10 years of operation in LoRaWAN® Class A mode under specified test conditions. Support for OTAA/ABP, Class A and Class B, local rules, multicast, schedules and NFC configuration allows autonomous irrigation systems to operate even during temporary loss of network communication. The enclosure IP68, temperature range −30…+70°C and compact dimensions of 116 × 116 × 45,5 mm enable year-round operation in outdoor installations.

Milesight UC502-868M is a battery-powered, multi-interface LoRaWAN® IoT controller with internal antenna, designed to integrate wired sensors, meters and industrial devices. The device offers 2 × GPIO, 2 analogue inputs 4–20 mA / 0–10 V, switchable interface RS232/RS485 with Modbus RTU, SDI-12 V1.4 and 3,3 V and 5/9/12 V power outputs. The variant 868M supports, among others, the European EU868 band, providing transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

UC502-868M is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each or with external voltage 5–24 V DC. It supports LoRaWAN® OTAA/ABP Class A, threshold alarms and value-change alarms, local storage of up to 600 records and data retransmission after connectivity is restored. Configuration via NFC, USB Type-C or downlink, the enclosure IP68, temperature range −30…+70°C and wall or pole mounting make it a universal telemetry node for demanding field installations.

Milesight UC501-868M is a solar-powered, multi-interface LoRaWAN® IoT controller with internal antenna, designed to integrate wired sensors, meters, transducers and industrial devices. It offers 2 × GPIO configurable as Digital Input, Digital Output or Pulse Counter, 2 analogue inputs 4–20 mA / 0–10 V, switchable interface RS232/RS485 with Modbus RTU, SDI-12 V1.4 and 3,3 V and 5/9/12 V power outputs. The 868M variant supports, among others, the European band EU868, with transmit power up to 16 dBm and receiver sensitivity down to −137 dBm.

UC501-868M uses 2 rechargeable ICR18650 2550 mAh batteries, built-in photovoltaic panel 6 V / 1,7 W and optional external power 5–24 V DC via an M12 connector. It supports LoRaWAN® OTAA/ABP in modes Class A and Class C, threshold alarms and value-change alarms, multicast, local storage of up to 600 records and data retransmission. The enclosure IP68, operating temperature range −20…+60°C and configuration via NFC, USB Type-C or downlink allow the controller to be used in autonomous field installations.

Milesight UC511-DI-868M is an autonomous LoRaWAN® solenoid-valve controller with internal antenna, designed for smart irrigation, remote flow control and water-consumption monitoring. The device offers 2 outputs for 2-wire 12 V DC latching valves and 2 Dry Contact digital inputs operating as Digital Input or Pulse Counter. The variant 868M supports, among others, EU868, offering transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

UC511 uses built-in 6 V / 1,7 W solar panel and 2 rechargeable ICR18650 batteries with a capacity of 2550 mAh each, enabling operation without a permanent power connection. Support for LoRaWAN® Class A, B and C, Milesight D2D, multicast, local rules and NFC configuration enables autonomous control systems to be built. The enclosure IP68, operating temperature −20…+60°C and wall or pole mounting allow the device to be used in year-round field installations.

Milesight UC300-868M is an industrial LoRaWAN® IoT controller designed to integrate wired sensors, meters, transducers and automation devices with wireless IoT infrastructure. The device offers 4 opto-isolated digital inputs, 2 SPDT relay outputs, 2 4–20 mA inputs, 2 0–10 V inputs, 2 PT100 RTD inputs, as well as RS232 and RS485 with Modbus RTU support. The 868M variant supports, among others, the European frequency plan EU868, transmit power up to 16 dBm and receiver sensitivity down to −137 dBm.

UC300-868M supports LoRaWAN® and Milesight D2D, local IF-THEN rules, threshold alarms, data storage and retransmission, and direct communication between compatible Milesight devices. The controller is powered by 5–24 V DC or 5 V via USB Type-C, has a metal enclosure, an SMA Female 50 Ω antenna connector and can be mounted on a DIN rail, wall or flat surface. The operating temperature range is −20…+60°Cfunction.

Milesight WS156-868M is a smart LoRaWAN® scene panel equipped with 6 programmable buttons and 2,9-inch black-and-white E-Ink display 128 × 296 px. Each button can be assigned to a separate scene and operate independently via LoRaWAN® or Milesight D2D, enabling control of lighting, air conditioning, blinds and other compatible automation elements. The display content can be personalised by uploading custom graphics and labels corresponding to specific scenes.

Variant 868M supports, among others, the European EU868 band and operates as a LoRaWAN® OTAA/ABP Class A. WS156 can operate as a Milesight D2D Controller, allowing a single command to be received by multiple D2D Agent devices without using a LoRaWAN® gateway. The panel is powered by 2 replaceable CR2450 590 mAh batteries, and the manufacturer-declared battery life exceeds 3 years under specified test conditions. The compact 86 × 86 × 14 mm enclosure enables mounting with 3M tape, on an 86 mm box, or placing the device on a surface.

Milesight WS513-868M, PN: 16A-W11-EU is a smart, flush-mounted electrical socket LoRaWAN® EU868 Type F designed for remote load control and energy-consumption monitoring. The variant 16A-W11-EU supports a load up to 16 A and measures voltage, current, power factor, active power and cumulative energy consumption in kWh. Control can be local via the button or remote via LoRaWAN®, and functions also include delayed switching, button lock, and overload protection and alarming.

WS513 operates as a LoRaWAN® OTAA/ABP Class C, uses an internal antenna and supports Milesight D2D Agent and multicast for group device control. Configuration is via NFC with the Milesight ToolBox app or remotely via downlink. The socket operates at 100–250 V AC, 50–60 Hz, has shutter-protected contacts, a flame-retardant UL94 V0 polycarbonate enclosure and IP20 rating. The dimensions of the Type F variant are 86,3 × 86,3 × 45,8 mmfunction.

Milesight WS523-868M is a smart LoRaWAN® socket designed for remote switching of electrical devices and monitoring their energy consumption. It measures voltage, current, power factor, active power and energy consumption in kWh, and additionally supports schedules, delayed switching and overcurrent protection with alarming. The variant 868M is intended, among others, for EU868 networks and uses an internal LoRaWAN® antenna.

WS523 operates as a LoRaWAN® OTAA/ABP Class C, enabling rapid response to remote control commands. It also supports Milesight D2D Agent, multicast, power-loss alarm, button lock and configuration via NFC or LoRaWAN® downlink. The device operates at 100–250 V AC, 50–60 Hz, and European variants are available with a load rating up to 16 A. The exact plug and socket type depends on the ordered WS523 variant.

Milesight WS501-868M, PN: 3W-W11-EU is a smart, 1-channel LoRaWAN® wall switch designed for local and remote control of lighting or another electrical load. The variant 3W-W11-EU is a 3-wire version requiring a neutral conductor and is designed for 86 mm square box. The device operates at 100–250 V AC, 50–60 Hz, supports a resistive load up to 10 A, inductive up to 5 A and power up to 1000 W. In addition, it measures voltage, current, power factor, active power and energy consumption in kWh.

WS501-868M operates as a LoRaWAN® OTAA/ABP Class C with an internal antenna and supports Milesight D2D, allowing it to act as a D2D Agent or D2D Controller. Delay Switch, Switch Lock, overcurrent protection and multicast functions are also available. Configuration is via NFC with the Milesight ToolBox app or remotely via downlink. The white flame-retardant UL94 V0 polycarbonate enclosure has an ingress protection rating of IP20, dimensions 86 × 86 × 40 mm and weighs approximately 94 gfunction.

Milesight WS502-868M, PN: 3W-W11-EU is a smart, 2-channel LoRaWAN® wall switch in the European 86 × 86 mm format, designed for remote and local control of lighting and other electrical loads. The variant 3W requires a neutral conductor, and two independent SPST channels allow two circuits to be controlled. The device operates at 100–250 V AC, 50–60 Hz, supports a load up to 1000 W per channel and 2000 W total and measures voltage, current, power factor, active power and energy consumption in kWh.

WS502-868M uses LoRaWAN® OTAA/ABP Class C and Milesight D2D, enabling remote control, local dependencies between devices and group control via multicast. It supports schedules, delayed switching, key lock and overcurrent protection, and is configured via NFC with the Milesight ToolBox app or remotely via downlink. The built-in antenna, IP20 enclosure made of flame-retardant UL94 V0 polycarbonate and dimensions 86 × 86 × 40 mm are designed for wall mounting in a standard 86 mm box.

Milesight UC100-868M is a compact converter Modbus RS485 to LoRaWAN® designed for wireless integration of existing meters, analysers, inverters, controllers and other Modbus RTU devices. The controller can communicate with up to 32 Modbus RTU devices and read up to 64 registers. Variant 868M supports EU868, IN865 and RU864, offering transmit power up to 16 dBm and receiver sensitivity down to −137 dBm. The version without the EA designation uses a LoRaWAN® antenna integrated into the device.

UC100-868M operates as a LoRaWAN® OTAA/ABP Class C and also supports Milesight D2D, up to 16 IF-THEN rules, threshold alarms and value-change alarms, local memory for up to 800 data sets and retransmission of stored information. The device is powered by 5–24 V DC or 5 V via USB Type-C, consumes less than 0,5 W and can be configured locally via USB-C or remotely via LoRaWAN® downlink. The compact IP30 enclosure measures 70 × 45 × 13 mmfunction.