Milesight

Milesight VS340-868M is a wireless desk and workstation occupancy sensor using a precise PIR sensor. The device determines whether a specific place is occupied, achieving detection accuracy of up to 95% without cameras and without identifying users.

VS340-868M communicates via LoRaWAN EU868 and supports Milesight D2D for direct cooperation with compatible devices. Adjustable PIR covers enable the detection field to be adapted to different desk types, while one ER18505 Li-SOCl₂ 4000 mAh battery provides more than 10 years of operation at SF7 under the manufacturer’s test conditions.

Milesight UG56-868M is a compact, industrial 8-channel LoRaWAN® gateway designed for building IoT networks in industrial plants, buildings, warehouses and telemetry systems. Variant 868M supports the EU868, IN865 and RU864 plans, while in Poland the EU868plan is used. The gateway operates in Half-Duplex mode, achieves sensitivity down to −140 dBm at 292 bps, maximum transmit power of 27 dBm and can support approximately 2000 LoRaWAN® Class A/B/C devices at an uplink interval of 10 minutes. The external SMA Female 50 Ω connector allows selection of an antenna suited to installation conditions.

Version UG56-868M does not have the optional cellular modem, so communication with the higher-level system is provided via 10/100 Mbps Ethernet or 2,4 GHz Wi-Fi. The device has a built-in LoRaWAN® Network Server, Gateway Fleet, multicast, FUOTA, Noise Analyzer, Packet Filter and data retransmission, and supports integration via MQTT(S), HTTP(S), BACnet/IP, BACnet/SC and Modbus. A Quad-Core ARM Cortex-A35 1,3 GHz processor, 512 MB DDR3 RAM and 8 GB eMMC also enable the use of Node-RED and Python SDK. The gateway is powered via IEEE 802.3af PoE or USB-C 5 V / 2 A and has a metal IP30 enclosure measuring 110 × 75 × 24 mm.

Milesight UG56-L08GL-868M is an industrial, 8-channel LoRaWAN® gateway designed for IoT installations in industrial plants, buildings, warehouses and distributed telemetry systems. Variant 868M supports, among others, the European EU868 frequency plan, while the L08GL version is equipped with 4G LTE cellular communication. The UG56 uses a Quad-Core ARM Cortex-A35 1,3 GHz processor, 512 MB DDR3 RAM and 8 GB eMMC and supports approximately 2000 LoRaWAN® Class A/B/C devices with a typical uplink interval of 10 minutes.

The gateway offers 10/100 Mbps Ethernet with PoE, 2,4 GHz Wi-Fi and 4G LTE, while for LoRaWAN® it has an external SMA Female 50 Ω antenna connector. The built-in Network Server supports Gateway Fleet, multicast, FUOTA, custom codecs and integration via MQTT(S), HTTP(S), BACnet/IP, BACnet/SC and Modbus. Node-RED, Python SDK, WAN Failover and VPN technologies including OpenVPN, IPsec, WireGuard and others are also available. The metal IP30 enclosure measures 110 × 75 × 24 mm and enables desktop, wall and — in the newer hardware version — DIN-rail mounting.

Milesight UG65-868M-EA is an industrial, 8-channel LoRaWAN® gateway designed primarily for IoT installations in buildings, commercial facilities and industrial environments. Variant 868M supports, among others, the European EU868 frequency plan, while the EA designation indicates a version with an external LoRaWAN® antenna connector N-Female 50 Ω. The gateway uses a Quad-Core ARM Cortex-A53 1,5 GHz processor, 512 MB DDR4 RAM and 8 GB eMMC, offers 8 Half/Full-Duplex channels, sensitivity down to −140 dBm and support for approximately 2000 LoRaWAN® Class A/B/C devices with an uplink interval of 10 minutes.

This is the variant without the optional LTE cellular modem, therefore connection to the higher-level system can be provided via Gigabit Ethernet or 2,4 GHz Wi-Fi. The UG65 has a built-in LoRaWAN® Network Server, Gateway Fleet, multicast, FUOTA, Noise Analyzer, Packet Filter and data retransmission, as well as integration via MQTT(S), HTTP(S), BACnet/IP, BACnet/SC and Modbus. It also supports Node-RED, Python SDK and numerous VPN protocols. Power can be supplied via IEEE 802.3af PoE, 9–24 V DC or USB-C 5 V, while the IP65 enclosure enables desktop, wall or pole mounting.

Milesight UG67-L08GL-868M is an industrial, outdoor 8-channel LoRaWAN® gateway designed for extensive IoT installations in buildings, industry, Smart City and field applications. Variant 868M supports the European EU868, while the version L08GL frequency plan and provides 4G LTE cellular backhaul. The gateway uses a concentrator based on the Semtech SX1302 chipset, supports half/full-duplex operation, LoRaWAN® Class A/B/C devices and approximately 2000 end devices with a typical transmission interval of 10 minutes.

UG67 offers Gigabit Ethernet with PoE, 2,4 GHz Wi-Fi and 4G LTE with WAN Failover, as well as a built-in LoRaWAN® Network Server, Gateway Fleet, multicast, FUOTA, Noise Analyzer, Packet Filter and data retransmission. The device has a Quad-Core ARM Cortex-A53 1,5 GHzprocessor, 512 MB DDR4 RAM and 8 GB eMMC, supports Node-RED and Python SDK, as well as OpenVPN, IPsec, WireGuard and other VPN technologies. The IP67 enclosure operates from −40 to +70°C, has two external N-Female antenna connectors and can be mounted on a wall or pole.

Milesight UG65-L08GL-868M-EA is an industrial 8-channel LoRaWAN® gateway designed for extensive IoT installations in buildings and semi-outdoor environments. Variant 868M supports the European EU868 frequency plan, while the EA designation indicates a version with an external LoRaWAN® antenna connector N-Female 50 Ω. The gateway uses the Semtech SX1302 chipset, operates in Half/Full-Duplex mode, achieves sensitivity down to −140 dBm and can support approximately 2000 LoRaWAN® Class A/B/C devices with a typical uplink interval of 10 minutes.

Version L08GL includes a global 4G LTE cellular communication module supporting a wide range of LTE and GSM bands, while additional backhaul options are provided by Gigabit Ethernet with PoE and 2,4 GHz Wi-Fi. The UG65 has a built-in LoRaWAN® Network Server, Gateway Fleet, multicast, FUOTA, Noise Analyzer, data retransmission and integration via MQTT(S), HTTP(S), BACnet/IP, BACnet/SC and Modbus. A Quad-Core ARM Cortex-A53 1,5 GHz processor, 512 MB DDR4 RAM and 8 GB eMMC also enable the use of Node-RED and Python SDK. The IP65 enclosure operates at temperatures from −40 to +70°C and enables desktop, wall or pole mounting.

Milesight VS373-868M is a contactless radar fall detection sensor using 4D 60 GHz mmWave radar and AI algorithms. The device enables 24/7 fall detection with manufacturer-declared accuracy of up to 99%, without cameras and without recording images. It also monitors presence, lying position, motionlessness, dwell time, bed presence and breathing motion.

VS373-868M uses LoRaWAN EU868 Class C, 2.4 GHz Wi-Fi and Milesight D2D. It has a local buzzer and multicolor LED, a 60 V / 1 A DO output, memory for 1000 records and an IP65enclosure. The sensor is designed primarily for nursing homes, hospital rooms, accessible bathrooms and other spaces where rapid fall detection is required while preserving user privacy.

Milesight WS301-868M is a compact magnetic open/close sensor for doors, windows, cabinets, and other movable elements. The reed switch detects a change in the magnet position at a distance of approximately 10–15 mm and transmits the information via the LoRaWAN 868 MHz network.

The device features tamper detection, an LED indicator, and supports Milesight D2D, enabling direct cooperation with compatible Milesight devices. The fully wireless design, NFC configuration, and replaceable 1200 mAh battery make it easy to deploy door and window monitoring in offices, warehouses, technical facilities, and Smart Building systems.

Milesight EM300-MCS-868M is a wireless magnetic sensor for monitoring the opening of doors, windows, cabinets, and other movable elements. The reed switch detects a change of state when the magnet is at a distance of 20–30 mmand information about the open or closed state is transmitted via the LoRaWAN network.

The device also measures temperature from −30 to +70°C and humidity from 0–100% RH. The IP67 enclosure with UV resistance, storage for 2800 records, Milesight D2D, and a replaceable 4000 mAh battery make the EM300-MCS suitable for monitoring technical rooms, warehouses, cabinets, doors, and industrial infrastructure.

Milesight SS21 PN03-150 is a magnetic reed switch sensor designed to detect the opening and closing of doors, covers, or other movable elements when used with Milesight TS301 and TS302 devices. The sensor consists of two magnetic elements measuring 31 × 14 × 7,5 mm, and its detection distance is approximately 20–30 mm.

The SS21 PN03-150 features a 1,5 m cable and can be mounted using screws or 3M tape. When connected to the TS301 or TS302, it enables the open/closed state to be recorded and information to be transmitted through the LoRaWAN system of the main device. With the TS302, a PT100 temperature probe and the SS21 magnetic sensor can be used simultaneously.

Milesight EM300-MLD-868M is a membrane LoRaWAN liquid leak sensor designed for monitoring larger surfaces at risk of flooding. The flexible detection film measuring 400 × 400 mm detects the presence of conductive liquids such as water, weak acids, and weak alkalis.

The device is suitable for applications including beneath equipment, server rooms, warehouses, technical cabinets, and water installations. The IP67 enclosure, storage for 1000 records, data retransmission, Milesight D2D, and replaceable 4000 mAh battery provide reliable monitoring and rapid response to detected leaks.

Milesight FT101-868M is a portable field tester designed for measuring, analysing and optimising LoRaWAN® network coverage in the EU868 band. The device enables real-time monitoring of key connection parameters such as RSSI, SNR, packet loss, Spreading Factor and transmit power, helping select optimal installation locations for gateways and end devices. The colour touchscreen 5,72" with a resolution of 1440 × 720 px, receiver sensitivity down to −137 dBm and maximum transmit power 16 dBm for 868 MHz enable convenient measurements directly at the planned deployment location.

FT101 also offers channel noise scanning, Ping-Pong tests, recording measurement points with GNSS position and report export via USB Type-C. The device runs Android 12, has 4 GB RAM, 64 GB storage, Wi-Fi, Bluetooth 4.0 BLE, NFC and a microSD slot up to 256 GB. The built-in battery 4300 mAh provides approximately 8 hours of active operation, and the IP65 enclosure and temperature range −10…+50°C allow the tester to be used during field commissioning and servicing of LoRaWAN® installations.

Milesight WS303-868M is a compact wireless LoRaWAN water leak sensor designed for rapid detection of conductive liquids. The built-in probes respond at a liquid level of approximately 0,5 mmwhile leak detection can be indicated locally by a buzzer and remotely through the monitoring system.

The device features an enclosure rated IP67supports Milesight D2D, and can directly trigger a compatible automation component, such as a valve controller. The replaceable CR2450 590 mAh battery provides up to approximately 5,7 years of operation, while the compact dimensions of 63 × 63 × 14 mm allow the sensor to be installed even in confined spaces.

Milesight UG63-868M is compact, 8-channel LoRaWAN® gateway designed for small and medium-sized IoT installations and for extending coverage in areas with weaker radio coverage. Variant 868M supports the European EU868 plan, operates in Half-Duplex mode, achieves sensitivity down to −140 dBm at 292 bps and a maximum transmit power of 27 dBm. As a packet forwarder, it can support approximately 2000 LoRaWAN® Class A/B/C devices, while the built-in Network Server can locally support up to 20 Class A/C devices and forward their data via MQTT.

UG63-868M is a variant without an LTE cellular modem, therefore communication with the Network Server or IoT platform is provided via Ethernet 10/100 Mb/s. 2,4 GHz Wi-Fi in Access Point mode is used to configure the device. The gateway has an external LoRaWAN® antenna connector, OpenVPN Client, Packet Filter and data retransmission, and can be powered via USB-C 5 V / 2 A or 5–12 V DC. Optionally, IEEE 802.3af PoE power is also possible when a suitable splitter is used. The IP30 enclosure measures Ø115 × 21 mm and weighs approximately 140 g.

Milesight WS203-868M is a wireless LoRaWAN occupancy, temperature, and humidity sensor designed for smart offices, buildings, hospitals, and other spaces requiring room utilisation monitoring. The PIR sensor detects movement at a range of up to 6 m, while interchangeable covers allow the detection field to be adapted to the installation location.

The WS203 measures temperature within a range of −20…+60°C with a typical accuracy of up to ±0,2°C and humidity from 0–100% RH with a typical accuracy of ±2% RH. The device features storage for 1000 records, data retransmission, Milesight D2D, NFC configuration, and a 4000 mAh battery providing up to approximately 10,7 years of operation under EU868/SF7 test conditions.

Milesight UC502-868M is a battery-powered, multi-interface LoRaWAN® IoT controller with internal antenna, designed to integrate wired sensors, meters and industrial devices. The device offers 2 × GPIO, 2 analogue inputs 4–20 mA / 0–10 V, switchable interface RS232/RS485 with Modbus RTU, SDI-12 V1.4 and 3,3 V and 5/9/12 V power outputs. The variant 868M supports, among others, the European EU868 band, providing transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

UC502-868M is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each or with external voltage 5–24 V DC. It supports LoRaWAN® OTAA/ABP Class A, threshold alarms and value-change alarms, local storage of up to 600 records and data retransmission after connectivity is restored. Configuration via NFC, USB Type-C or downlink, the enclosure IP68, temperature range −30…+70°C and wall or pole mounting make it a universal telemetry node for demanding field installations.

Milesight UC502-868M, PN: EA is a battery-powered multi-interface LoRaWAN® IoT controller designed to integrate wired sensors, meters and industrial devices in field installations. It offers 2 configurable GPIO ports, 2 4–20 mA or 0–10 V analogue inputs, switchable interface RS232/RS485 with Modbus RTU support and SDI-12 V1.4. Variant 868M supports EU868, IN865 and RU864, while the version EA has an SMA Female 50 Ω for an external LoRaWAN® antenna.

UC502 is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each or externally with voltage 5–24 V DC. The controller supports LoRaWAN® OTAA/ABP Class A, threshold alarms and value-change alarms, local data storage and retransmission of stored measurements. The sealed enclosure IP68, operating temperature range −30…+70°C, configuration via NFC and USB Type-C and wall or pole mounting allow the device to be used in demanding telemetry, agricultural and environmental systems.

Milesight VB01 is a multifunctional adjustable mounting bracket designed for installing Milesight people counters on a ceiling or lintel. The telescopic design allows the sensor mounting height to be adjusted, while the adjustable head enables tilt up to 90° and 360° rotation. The bracket is made of corrosion-resistant aluminium and is available in white or black.

VB01 is available in a short version with an adjustment range of 0,4–0,6 m and an optional long version of 2,05–3 m. It is compatible with VS125 Series, VS133 Series, VS135 Series, VS126 and VS351; an additional mounting plate is used for the VS133 Series. The design supports ceiling and lintel mounting and precise positioning of the sensor relative to the monitored passage.

Milesight VA04 MSB-R/B is a multifunctional staff badge designed for use with Milesight VS125 Seriespeople counters. The distinctive badge pattern is recognized by the Staff Detection function, allowing employee passages to be automatically separated from customer traffic and excluded from visitor statistics.

VA04 can be worn on the chest or shoulder and uses magnetic fastening, with an optional pin-back version. It is available in Red & White and Black & Whiteversions. When worn on the chest, one badge is sufficient, while in shoulder mode the manufacturer requires marking both shoulders. Required VS125 counter firmware: V1.0.4 or later.

Milesight EM400-MUD-N03GL, PN: B045-2 is a multifunctional ultrasonic distance and fill-level sensor with NB-IoT / LTE Cat M1 and GNSS positioning. It enables non-contact measurement across a wide range of 3–450 cm, with 1 mm resolution and a small blind zone. It was designed especially for monitoring medium and large waste containers, but can also be used for general distance and level measurements.

The EM400-MUD features 3-axis accelerometer for tilt detection and an NTC sensor enabling, among other things, detection of elevated temperature inside the container. The IP67 enclosure, two replaceable 9000 mAh ER26500 batteries, NFC configuration, GNSS, and direct cellular communication enable autonomous monitoring systems without a LoRaWAN gateway.

Milesight VS125-O-P is a professional outdoor AI people counter using two 4 MP sensors, 3D stereo vision and deep learning algorithms. The device achieves counting accuracy of up to 99,8%, operates at a mounting height of 2,2–6 m and offers a field of view 101° × 70°. It supports, among other features, bidirectional counting, Regional People Counting, Dwell Time, Group Counting, Heat Map, Staff Detection and child/adult differentiation.

Version VS125-O-P has an IP67 housing designed for outdoor applications and a 10/100 Mbps Ethernet port with 802.3af PoE, so data transmission and power can be provided through a single cable. The device supports, among other protocols, MQTT/MQTTS, HTTP/HTTPS, 802.1X, OpenVPN and BACnet/IP, has DI/DO and local storage for up to 1,000,000 records.

Milesight VS125-O-L0BEU is an outdoor people counter using AI and 3D stereo vision with two 4 MP sensors. The device achieves counting accuracy of up to 99,8%, operating at a height of 2,2–6 m and offers a field of view 101° × 70°. It supports bidirectional counting, Regional People Counting, Dwell Time, Group Counting, Staff Detection, child/adult differentiation, Gender Recognition and Heat Map.

Version VS125-O-L0BEU uses 4G LTE Cat 1 with a Nano SIM card and supports, among other protocols, MQTT/MQTTS and HTTP/HTTPS. The IP67 housing and operating temperature from −20 to +65°C allow the device to be used outdoors and in demanding semi-open spaces. Built-in IR illumination also enables operation at 0 lx.

Milesight AT101-868M is an industrial LoRaWAN asset tracker designed for monitoring vehicles, machinery, containers, equipment, and other valuable assets. The device uses GNSS and Wi-Fi network scanning, providing positioning even in locations where the satellite signal is limited.

The AT101 supports geofencing, motion and tilt detection, and a tamper alarm, three tracking modes, and storage for 1000 records with data retransmission. The IP67 enclosure and IK09 mechanical resistance enable operation in demanding environments, while four replaceable 2700 mAh batteries provide more than 15 years of operation with two position updates per day under the manufacturer's test conditions.