Milesight

Milesight UC512-DI-868M is a battery-powered LoRaWAN® solenoid-valve controller with internal antenna, designed for smart irrigation, remote flow control and water-consumption monitoring. The device offers 2 outputs for 2-wire 12 V DC latching valves and 2 Dry Contact digital inputs, which can operate as Digital Input or Pulse Counter. The variant 868M supports, among others, the European EU868 band, offering transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

The controller is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each, providing, according to the manufacturer, more than 10 years of operation in LoRaWAN® Class A mode under specified test conditions. Support for OTAA/ABP, Class A and Class B, local rules, multicast, schedules and NFC configuration allows autonomous irrigation systems to operate even during temporary loss of network communication. The enclosure IP68, temperature range −30…+70°C and compact dimensions of 116 × 116 × 45,5 mm enable year-round operation in outdoor installations.

Milesight UC511-DI-868M is an autonomous LoRaWAN® solenoid-valve controller with internal antenna, designed for smart irrigation, remote flow control and water-consumption monitoring. The device offers 2 outputs for 2-wire 12 V DC latching valves and 2 Dry Contact digital inputs operating as Digital Input or Pulse Counter. The variant 868M supports, among others, EU868, offering transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

UC511 uses built-in 6 V / 1,7 W solar panel and 2 rechargeable ICR18650 batteries with a capacity of 2550 mAh each, enabling operation without a permanent power connection. Support for LoRaWAN® Class A, B and C, Milesight D2D, multicast, local rules and NFC configuration enables autonomous control systems to be built. The enclosure IP68, operating temperature −20…+60°C and wall or pole mounting allow the device to be used in year-round field installations.

Milesight S45 is a solar panel module designed to supply power to compatible Milesight cameras in outdoor installations. The manufacturer supplies it with wall- and pole-mounting brackets.

The panel measures 580 × 385 × 69 mm and weighs approximately 4,2 kg. It enables autonomous monitoring points to be built in locations where providing permanent power is costly or difficult.

Milesight CS0X/CSOX is a solar panel designed to work with compatible Milesight UC50x controllers, particularly variants intended for battery and solar power.

The manufacturer offers pole- and wall-mounting variants. The panel can power an outdoor IoT node without a permanent grid connection, for example in telemetry, agriculture, or infrastructure monitoring.

Milesight EM500-SMTC-868M is a wireless LoRaWAN sensor designed for monitoring soil moisture, temperature and electrical conductivity. The MEC20 probe enables continuous assessment of soil conditions in agriculture, horticulture and smart irrigation systems.

Rugged Probe IP68, an IP67 transmitter, LoRaWAN 868 MHz communication and a 19 000 mAh battery enable long-term operation in outdoor installations. The device also supports local measurement storage, threshold alarms, data retransmission and NFC configuration.

Milesight WT201-868M is a smart LoRaWAN thermostat designed to control most HVAC systems powered by 24 V AC, including heat pumps, air conditioning systems, furnaces, boilers, and PTAC units. The device supports heating, cooling, Emergency Heat, Auto mode, and fan control.

The WT201 features a 4,2-inch backlit LCD display, built-in temperature and humidity measurement, a digital input for a hotel key card or reed switch, and storage for 1000 records. LoRaWAN Class C, Milesight D2D, local schedules, freeze protection, Multicast, and FUOTA enable integration of the thermostat with modern Smart Building and BMS systems.

Milesight WS156-868M is a smart LoRaWAN® scene panel equipped with 6 programmable buttons and 2,9-inch black-and-white E-Ink display 128 × 296 px. Each button can be assigned to a separate scene and operate independently via LoRaWAN® or Milesight D2D, enabling control of lighting, air conditioning, blinds and other compatible automation elements. The display content can be personalised by uploading custom graphics and labels corresponding to specific scenes.

Variant 868M supports, among others, the European EU868 band and operates as a LoRaWAN® OTAA/ABP Class A. WS156 can operate as a Milesight D2D Controller, allowing a single command to be received by multiple D2D Agent devices without using a LoRaWAN® gateway. The panel is powered by 2 replaceable CR2450 590 mAh batteries, and the manufacturer-declared battery life exceeds 3 years under specified test conditions. The compact 86 × 86 × 14 mm enclosure enables mounting with 3M tape, on an 86 mm box, or placing the device on a surface.

Milesight WT102-868M is a self-powered smart LoRaWAN radiator thermostat that uses radiator heat energy to power its electronics and valve actuator. Thanks to energy harvesting technology, the device does not require periodic battery replacement or a permanent wired power source.

The WT102 measures temperature within a range of −20…+60°C, automatically controls the valve opening and allows the target temperature to be set within a range of 5…35°C. It supports up to 16 heating plans, open-window detection, freeze protection, storage for 1000 records, LoRaWAN Class B, NFC configuration, and an optional external NTC sensor connected via USB-C.

Milesight WT101-868M is a smart LoRaWAN radiator thermostat designed for precise temperature control in individual rooms. The built-in NTC sensor measures temperature within a range of −20…+60°C, while the stepper motor automatically controls the radiator valve opening level.

The WT101 supports automatic temperature control, direct valve opening control, up to 16 heating plans, open-window detection, freeze protection, and Child Lock. Two replaceable Li-FeS₂ AA batteries provide approximately 8 years of operation at SF7/EU868 under the manufacturer's test conditions.

Milesight WT304-868M is a smart LoRaWAN thermostat designed to control 2- and 4-pipe FCU fan coil units. It supports installations with 3-speed and 0–10 V EC fans and, depending on the system configuration, 0–10 V proportional valves and ON/OFF motorised valves.

The thermostat features a 2,7-inch E-Ink display, built-in temperature and humidity measurement, an NTC input, and a digital input for a hotel key card, reed switch, or other dry contact. Local schedules, open-window detection, freeze protection, Milesight D2D, and LoRaWAN Class C enable advanced HVAC control systems and BMS integration.

Milesight WT303-868M is a smart LoRaWAN thermostat designed to control 2- and 4-pipe FCU fan coil units with 3-speed fans. It supports 2- and 3-wire ON/OFF motorised valves in 2-pipe installations and 2-wire ON/OFF valves in 4-pipe installations.

The WT303 features a 2,7-inch E-Ink display, built-in temperature and humidity measurement, an input for an external NTC sensor, and a digital input for applications such as a hotel key card or reed switch. Local schedules, open-window detection, freeze protection, Milesight D2D, and LoRaWAN Class C communication enable advanced HVAC control systems and BMS integration.

Milesight CT105-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 500 A in a single conductor. The split-core design enables installation on an existing installation without disconnecting the conductor, while the 3,3 kHz sampling frequency allows rapid detection of load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT105-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced directly from the monitored conductor or by 5 V via USB-C. The current version reports data with self-powering from as low as 5 A at a 1-minute interval or 4,7 A at 10 minuteses, supports threshold and overrange alarms, an optional NTC temperature sensor and FUOTA updates.

Milesight CT103-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 250 A in a single conductor. The split-core design enables installation without disconnecting the monitored circuit, while 3,3 kHz sampling makes it possible to capture dynamic load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT103-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced from the monitored conductor or by 5 V via USB-C, and the current version enables regular reporting with self-powering starting from 3 A at a 1-minute interval or 2,8 A at 10 minuteses. The transformer opening has a diameter of 16 mm, and the device supports alarms, optional cable temperature measurement and FUOTA updates.

Milesight CT101-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 100 A in a single conductor. The split-core design enables installation without disconnecting the monitored circuit, while 3.3 kHz sampling makes it possible to detect short-term load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT101-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced from the monitored conductor or by 5 V via USB-C, and the current version enables regular self-powered reporting from as low as 1.5 A at a 1-minute interval or 1.4 A at 10 minuteses. The transformer opening has a diameter of 16 mm, and the device supports alarms, optional conductor-temperature measurement and FUOTA updates.

Milesight WS101-868M is a compact, battery-powered LoRaWAN® button designed to trigger scenes, control devices and send events and alarms. Two versions are available: PN: Scene with white button and PN: SOS with red button. The device recognises short press, long press and double press, allowing one button to perform several different functions. The 868M variant supports, among others, the European frequency plan EU868 and operates as a LoRaWAN® OTAA/ABP Class A device.

WS101 also supports Milesight D2D Controller, enabling direct control of compatible devices without using a LoRaWAN® gateway. It has an LED indicator, buzzer and configuration via NFC and the Milesight ToolBox app. Power is supplied by 1 ER14335 Li-SOCl₂ 1650 mAh battery, while the current manufacturer specification declares more than 5 years of operation under specified test conditions. The enclosure measures 50 × 50 × 18 mm, has an IP30 rating and can be mounted using screws, 3M tape or carried on a lanyard.

Milesight SCT01 Sensor Configuration Tool is a portable service and configuration tool designed for fast configuration of devices Milesight LoRaWAN® via NFC. A large NFC reading area compliant with ISO/IEC 14443A, reading range 1–3 cm, 7 dedicated buttons, a set of LED indicators and a buzzer enable basic operations without using a phone for each individual device. The solution is particularly useful for deployments involving a large number of sensors.

SCT01 has 16 MB of memory allowing storage of up to 50 configuration files and 1 firmware file, while Bluetooth 4.0 BLE enables export of configurations and logs. The built-in battery 2000 mAh provides approximately 6 hours of continuous operation and approximately one month in standby mode. The port USB 2.0 Type-C is used to charge the device and can also power the sensor being configured. SCT01 operates at temperatures from −20 to +60°C, has an IP30 protection rating and compact dimensions 160 × 60 × 26,5 mmfunction.

Milesight SC541 PN: 1020 is a compact sensor camera designed to automate visual inspections and remotely document equipment condition. The Close Capture variant uses a 4.8 mm F2.4 lens with a 77° field of view and is optimized for taking images from a distance of 10–20 cm.

The camera captures images at a resolution of 1920 × 1080 px and can trigger image capture by schedule, interval, Alarm-In signal or button. It supports 2.4 GHz Wi-Fi and MQTT, stores up to 40 images locally and can be powered via USB-C 5 V / 1 A or two AA batteries.

Milesight RRC-RJ11 is a flexible Rogowski coil for AC current measurement up to 4000 A, designed for use with the Milesight CTH01 Smart Power Monitor Hub. The large measurement opening Ø150 mm enables installation around large conductors and busbars, while measurement accuracy is ±2%.

The coil connects directly to a CTH01 measurement channel via an RJ11connector. It operates from −40 to +55°C, has insulation of 3 kV AC and a construction made of materials meeting UL94 V0. RRC-RJ11 is designed for energy consumption and electrical parameter monitoring systems with high current values.

Milesight EM411-RDL-868M is an industrial radar distance and level sensor with LoRaWAN EU868, also designed for operation in potentially explosive atmospheres ATEX Zone 0 – Ex ia IIC T4 Ga. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with a resolution of 1 mm and a narrow 8° beam.

The variant without an additional PN designation features an internal LoRaWAN antenna and a process connection G 1½". The PVDF enclosure provides an IP68 protection rating, while the 19 000 mAh Li-SOCl₂ battery enables approximately 7 years of operation under the manufacturer's test conditions. The sensor stores up to 2000 records and supports data retransmission, level alarms, radar diagnostics, and tilt monitoring.

Milesight EM410-RDL-L0CEU is an industrial radar distance and level sensor with direct LTE Cat.1. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with a resolution of 1 mm, a narrow 8° beam, and accuracy reaching ±2 mm under optimal conditions.

The L0CEU version supports a Nano SIM and European LTE bands, so it does not require a LoRaWAN gateway. This variant features an internal antenna and a G 1½" thread. The PVDF enclosure provides an IP68 protection rating, while the 19 000 mAh Li-SOCl₂ battery provides approximately 5 Years of Operation under the manufacturer's test conditions.

Milesight EM410-RDL-868M is an industrial radar distance and level sensor with LoRaWAN EU868. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with 1 mm resolution, a narrow 8° beam, and accuracy reaching ±2 mm under optimal conditions.

The variant without an additional PN designation features an internal LoRaWAN antenna and a process connection G 1½". The IP68-rated PVDF enclosure, memory 2000 Records, data retransmission, level alarms, radar diagnostics, and a 3-axis accelerometer enable reliable monitoring of tanks, sewerage, wells, and water infrastructure.

Milesight VS370-868M is a wireless presence sensor combining 24 GHz mmWave radar and a PIR sensor. It detects both movement and subtle movements of a person remaining in a room, providing detection accuracy of up to 99% without using cameras or recording images.

Version LoRaWAN EU868 also supports Milesight D2D, Bright/Dim light status measurement and configuration via NFC and Bluetooth. The radar detects movement up to 7.5 m, and subtle movements up to 4.8 m. Power from 2 × ER14505 2700 mAh batteries enables, according to the manufacturer, up to approximately 6.7 years of operation under specified test conditions.

Milesight SP11 AF10-125-150 is a food-grade temperature probe Class A PT100 designed for direct temperature measurement of products and media within the range −40…125°C. The typical accuracy is ±0,4°C. The slim 316 stainless steel Food Grade needle tip measures Ø4 × 100 mm and has an IP67 protection rating, making the probe suitable for food, refrigeration, and laboratory applications.

The SP11 AF10-125-150 features a 1,5-metre Food Grade silicone cable rated for temperatures from −60 to 250°C. The Insert Installation design allows the probe to be placed directly in the monitored product. The accessory is designed to work with Milesight devices TS301, TS302 and TS602.

Milesight SP11 B05-125-200 is a standard temperature probe Class B PT100 designed to work with Milesight TS301, TS302 and TS602 devices. The measurement range is −40…125°C, with a typical accuracy of ±0,5°C within −40…40°C and ±1°C for temperatures from 40…125°C. The probe is suitable for monitoring cold rooms, warehouses, pharmaceutical and food applications, and other installations requiring an external temperature measurement point.

The measuring tip is made of 304 stainless steel measures Ø4 × 50 mm and has an IP67 protection rating. SP11 B05-125-200 features a 2 m PVC cable and can be used for contact measurement or together with the optional Milesight TB3984 buffer bottle, which stabilises measurements in refrigeration and cold-chain applications.