Milesight

Milesight GA01 is an outdoor omnidirectional fibreglass LoRaWAN® antenna designed to extend the range of Milesight gateways. The version 60 cm N-N (P/N: FNN600) operates in the 863–870 MHz and 902–928 MHz bands and provides a gain of 4–5 dBi. The antenna uses an N-type connector and is compatible, among others, with gateways UG65, UG65H and UG67.

The kit includes a 600 mm antenna and a 1 m RF cable terminated with N connectors. The omnidirectional radiation pattern makes the GA01 well suited to extending LoRaWAN® network coverage around a gateway, particularly in industrial and outdoor installations where the antenna needs to be positioned in a more favourable location.

Milesight EM500-PP-868M is a wireless LoRaWAN sensor designed for monitoring pressure in piping systems carrying liquids and gases. The G1/2M-4842 variant offers a measurement range of 0–16 bar, an accuracy of ±0,5% FS and a male G 1/2" process connection.

The 316L stainless steel probe is connected to a rugged LoRaWAN 868 MHz communication module. The device features local storage for 1000 records, threshold alarms, data retransmission and a 19 000 mAh battery providing up to 10 years of operation under the manufacturer's reference conditions.

Milesight WS202-868M is a compact LoRaWAN PIR occupancy and light intensity sensor designed for smart offices, schools, warehouses, and Smart Building systems. The sensor detects movement at a range of up to 8 m, with a maximum detection field of 120° horizontally and 100° vertically.

The built-in light sensor operates within a range of 1–60 000 lx and makes it possible to determine Bright/Dark status according to a configured threshold. Milesight D2D support enables direct control of compatible devices, such as lighting, without using a LoRaWAN gateway. The 1650 mAh battery provides approximately 4,2 years of operation at SF7/EU868 under the manufacturer's test conditions.

Milesight VS121-P is a wired occupancy sensor and people counter using AI algorithms to analyze presence and space utilization. It offers a wide field of view 190° × 112°, mounting at a height of 2,3–4 m and recognition accuracy up to 98% according to the current datasheet. It supports Regional People Counting, Dwell Time, bidirectional people counting, U-turn Filtering and People Flow Analysis.

Version VS121-P uses 10/100 Mb/s Ethernet and 802.3af PoE, so data transmission and power can be provided over a single cable. It supports, among others, MQTT(S), HTTP(S), RTSP, NTP, SSH and BACnet/IP and has 1 × DI and 1 × DO. The device is intended for ceiling mounting in offices, conference rooms, retail stores and other spaces requiring occupancy analysis.

Milesight MS-S0416-GF is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 16 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s + 2 × SFP 1000 Mb/s, poe budget: 250 W.

Milesight MS-S0424-GF is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 24 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s + 2 × SFP 1000 Mb/s, poe budget: 400 W.

Milesight WS523-868M is a smart LoRaWAN® socket designed for remote switching of electrical devices and monitoring their energy consumption. It measures voltage, current, power factor, active power and energy consumption in kWh, and additionally supports schedules, delayed switching and overcurrent protection with alarming. The variant 868M is intended, among others, for EU868 networks and uses an internal LoRaWAN® antenna.

WS523 operates as a LoRaWAN® OTAA/ABP Class C, enabling rapid response to remote control commands. It also supports Milesight D2D Agent, multicast, power-loss alarm, button lock and configuration via NFC or LoRaWAN® downlink. The device operates at 100–250 V AC, 50–60 Hz, and European variants are available with a load rating up to 16 A. The exact plug and socket type depends on the ordered WS523 variant.

Milesight SP11 A05-500-150 is an industrial temperature probe Class A PT100 designed for measurements across a wide range from −50 to 500°C. The typical accuracy is ±0,4°C within −50…125°C and ±1,15°C at 125…500°C. The probe is designed to work with Milesight TS301, TS302 and TS602 devices.

The measuring element is housed in a straight sleeve made of 304 stainless steeland the fibreglass cable with a length of 1,5 m is rated for operation at temperatures up to 500°C. The SP11 A05-500-150 is suitable for industrial installations, furnaces, heating equipment, technological processes, and other applications requiring high-temperature measurement.

Milesight SP11 A03-050-150 is a precision temperature probe Class A PT100 designed for measurements at very low temperatures. The measurement range extends to −200…50°C, with a typical accuracy of ±0,5°C within −175…50°C and ±0,55°C within −200…−175°C. The probe is designed to work with Milesight TS301, TS302 and TS602 devices.

The measuring tip is made of 304 stainless steel measures Ø4 × 30 mm and has an IP67 protection rating. The Teflon cable with a length of 1,5 m can operate at temperatures from −200 to 290°C, making the SP11 A03-050-150 suitable for low-temperature chambers, refrigeration, laboratories, and other applications requiring temperature measurement far below 0°C.

Milesight SP11 B05-125-200 is a standard temperature probe Class B PT100 designed to work with Milesight TS301, TS302 and TS602 devices. The measurement range is −40…125°C, with a typical accuracy of ±0,5°C within −40…40°C and ±1°C for temperatures from 40…125°C. The probe is suitable for monitoring cold rooms, warehouses, pharmaceutical and food applications, and other installations requiring an external temperature measurement point.

The measuring tip is made of 304 stainless steel measures Ø4 × 50 mm and has an IP67 protection rating. SP11 B05-125-200 features a 2 m PVC cable and can be used for contact measurement or together with the optional Milesight TB3984 buffer bottle, which stabilises measurements in refrigeration and cold-chain applications.

Milesight SP11 AF10-125-150 is a food-grade temperature probe Class A PT100 designed for direct temperature measurement of products and media within the range −40…125°C. The typical accuracy is ±0,4°C. The slim 316 stainless steel Food Grade needle tip measures Ø4 × 100 mm and has an IP67 protection rating, making the probe suitable for food, refrigeration, and laboratory applications.

The SP11 AF10-125-150 features a 1,5-metre Food Grade silicone cable rated for temperatures from −60 to 250°C. The Insert Installation design allows the probe to be placed directly in the monitored product. The accessory is designed to work with Milesight devices TS301, TS302 and TS602.

Milesight VS370-868M is a wireless presence sensor combining 24 GHz mmWave radar and a PIR sensor. It detects both movement and subtle movements of a person remaining in a room, providing detection accuracy of up to 99% without using cameras or recording images.

Version LoRaWAN EU868 also supports Milesight D2D, Bright/Dim light status measurement and configuration via NFC and Bluetooth. The radar detects movement up to 7.5 m, and subtle movements up to 4.8 m. Power from 2 × ER14505 2700 mAh batteries enables, according to the manufacturer, up to approximately 6.7 years of operation under specified test conditions.

Milesight EM410-RDL-868M is an industrial radar distance and level sensor with LoRaWAN EU868. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with 1 mm resolution, a narrow 8° beam, and accuracy reaching ±2 mm under optimal conditions.

The variant without an additional PN designation features an internal LoRaWAN antenna and a process connection G 1½". The IP68-rated PVDF enclosure, memory 2000 Records, data retransmission, level alarms, radar diagnostics, and a 3-axis accelerometer enable reliable monitoring of tanks, sewerage, wells, and water infrastructure.

Milesight EM410-RDL-L0CEU is an industrial radar distance and level sensor with direct LTE Cat.1. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with a resolution of 1 mm, a narrow 8° beam, and accuracy reaching ±2 mm under optimal conditions.

The L0CEU version supports a Nano SIM and European LTE bands, so it does not require a LoRaWAN gateway. This variant features an internal antenna and a G 1½" thread. The PVDF enclosure provides an IP68 protection rating, while the 19 000 mAh Li-SOCl₂ battery provides approximately 5 Years of Operation under the manufacturer's test conditions.

Milesight EM411-RDL-868M is an industrial radar distance and level sensor with LoRaWAN EU868, also designed for operation in potentially explosive atmospheres ATEX Zone 0 – Ex ia IIC T4 Ga. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with a resolution of 1 mm and a narrow 8° beam.

The variant without an additional PN designation features an internal LoRaWAN antenna and a process connection G 1½". The PVDF enclosure provides an IP68 protection rating, while the 19 000 mAh Li-SOCl₂ battery enables approximately 7 years of operation under the manufacturer's test conditions. The sensor stores up to 2000 records and supports data retransmission, level alarms, radar diagnostics, and tilt monitoring.

Milesight RRC-RJ11 is a flexible Rogowski coil for AC current measurement up to 4000 A, designed for use with the Milesight CTH01 Smart Power Monitor Hub. The large measurement opening Ø150 mm enables installation around large conductors and busbars, while measurement accuracy is ±2%.

The coil connects directly to a CTH01 measurement channel via an RJ11connector. It operates from −40 to +55°C, has insulation of 3 kV AC and a construction made of materials meeting UL94 V0. RRC-RJ11 is designed for energy consumption and electrical parameter monitoring systems with high current values.

Milesight SC541 PN: 1020 is a compact sensor camera designed to automate visual inspections and remotely document equipment condition. The Close Capture variant uses a 4.8 mm F2.4 lens with a 77° field of view and is optimized for taking images from a distance of 10–20 cm.

The camera captures images at a resolution of 1920 × 1080 px and can trigger image capture by schedule, interval, Alarm-In signal or button. It supports 2.4 GHz Wi-Fi and MQTT, stores up to 40 images locally and can be powered via USB-C 5 V / 1 A or two AA batteries.

Milesight SCT01 Sensor Configuration Tool is a portable service and configuration tool designed for fast configuration of devices Milesight LoRaWAN® via NFC. A large NFC reading area compliant with ISO/IEC 14443A, reading range 1–3 cm, 7 dedicated buttons, a set of LED indicators and a buzzer enable basic operations without using a phone for each individual device. The solution is particularly useful for deployments involving a large number of sensors.

SCT01 has 16 MB of memory allowing storage of up to 50 configuration files and 1 firmware file, while Bluetooth 4.0 BLE enables export of configurations and logs. The built-in battery 2000 mAh provides approximately 6 hours of continuous operation and approximately one month in standby mode. The port USB 2.0 Type-C is used to charge the device and can also power the sensor being configured. SCT01 operates at temperatures from −20 to +60°C, has an IP30 protection rating and compact dimensions 160 × 60 × 26,5 mmfunction.

Milesight WS101-868M is a compact, battery-powered LoRaWAN® button designed to trigger scenes, control devices and send events and alarms. Two versions are available: PN: Scene with white button and PN: SOS with red button. The device recognises short press, long press and double press, allowing one button to perform several different functions. The 868M variant supports, among others, the European frequency plan EU868 and operates as a LoRaWAN® OTAA/ABP Class A device.

WS101 also supports Milesight D2D Controller, enabling direct control of compatible devices without using a LoRaWAN® gateway. It has an LED indicator, buzzer and configuration via NFC and the Milesight ToolBox app. Power is supplied by 1 ER14335 Li-SOCl₂ 1650 mAh battery, while the current manufacturer specification declares more than 5 years of operation under specified test conditions. The enclosure measures 50 × 50 × 18 mm, has an IP30 rating and can be mounted using screws, 3M tape or carried on a lanyard.

Milesight CT101-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 100 A in a single conductor. The split-core design enables installation without disconnecting the monitored circuit, while 3.3 kHz sampling makes it possible to detect short-term load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT101-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced from the monitored conductor or by 5 V via USB-C, and the current version enables regular self-powered reporting from as low as 1.5 A at a 1-minute interval or 1.4 A at 10 minuteses. The transformer opening has a diameter of 16 mm, and the device supports alarms, optional conductor-temperature measurement and FUOTA updates.

Milesight CT103-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 250 A in a single conductor. The split-core design enables installation without disconnecting the monitored circuit, while 3,3 kHz sampling makes it possible to capture dynamic load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT103-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced from the monitored conductor or by 5 V via USB-C, and the current version enables regular reporting with self-powering starting from 3 A at a 1-minute interval or 2,8 A at 10 minuteses. The transformer opening has a diameter of 16 mm, and the device supports alarms, optional cable temperature measurement and FUOTA updates.

Milesight CT105-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 500 A in a single conductor. The split-core design enables installation on an existing installation without disconnecting the conductor, while the 3,3 kHz sampling frequency allows rapid detection of load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT105-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced directly from the monitored conductor or by 5 V via USB-C. The current version reports data with self-powering from as low as 5 A at a 1-minute interval or 4,7 A at 10 minuteses, supports threshold and overrange alarms, an optional NTC temperature sensor and FUOTA updates.

Milesight WT303-868M is a smart LoRaWAN thermostat designed to control 2- and 4-pipe FCU fan coil units with 3-speed fans. It supports 2- and 3-wire ON/OFF motorised valves in 2-pipe installations and 2-wire ON/OFF valves in 4-pipe installations.

The WT303 features a 2,7-inch E-Ink display, built-in temperature and humidity measurement, an input for an external NTC sensor, and a digital input for applications such as a hotel key card or reed switch. Local schedules, open-window detection, freeze protection, Milesight D2D, and LoRaWAN Class C communication enable advanced HVAC control systems and BMS integration.

Milesight WT304-868M is a smart LoRaWAN thermostat designed to control 2- and 4-pipe FCU fan coil units. It supports installations with 3-speed and 0–10 V EC fans and, depending on the system configuration, 0–10 V proportional valves and ON/OFF motorised valves.

The thermostat features a 2,7-inch E-Ink display, built-in temperature and humidity measurement, an NTC input, and a digital input for a hotel key card, reed switch, or other dry contact. Local schedules, open-window detection, freeze protection, Milesight D2D, and LoRaWAN Class C enable advanced HVAC control systems and BMS integration.