Milesight

Milesight SP11 A03-050-150 is a precision temperature probe Class A PT100 designed for measurements at very low temperatures. The measurement range extends to −200…50°C, with a typical accuracy of ±0,5°C within −175…50°C and ±0,55°C within −200…−175°C. The probe is designed to work with Milesight TS301, TS302 and TS602 devices.

The measuring tip is made of 304 stainless steel measures Ø4 × 30 mm and has an IP67 protection rating. The Teflon cable with a length of 1,5 m can operate at temperatures from −200 to 290°C, making the SP11 A03-050-150 suitable for low-temperature chambers, refrigeration, laboratories, and other applications requiring temperature measurement far below 0°C.

Milesight SP11 A05-500-150 is an industrial temperature probe Class A PT100 designed for measurements across a wide range from −50 to 500°C. The typical accuracy is ±0,4°C within −50…125°C and ±1,15°C at 125…500°C. The probe is designed to work with Milesight TS301, TS302 and TS602 devices.

The measuring element is housed in a straight sleeve made of 304 stainless steeland the fibreglass cable with a length of 1,5 m is rated for operation at temperatures up to 500°C. The SP11 A05-500-150 is suitable for industrial installations, furnaces, heating equipment, technological processes, and other applications requiring high-temperature measurement.

Milesight WS523-868M is a smart LoRaWAN® socket designed for remote switching of electrical devices and monitoring their energy consumption. It measures voltage, current, power factor, active power and energy consumption in kWh, and additionally supports schedules, delayed switching and overcurrent protection with alarming. The variant 868M is intended, among others, for EU868 networks and uses an internal LoRaWAN® antenna.

WS523 operates as a LoRaWAN® OTAA/ABP Class C, enabling rapid response to remote control commands. It also supports Milesight D2D Agent, multicast, power-loss alarm, button lock and configuration via NFC or LoRaWAN® downlink. The device operates at 100–250 V AC, 50–60 Hz, and European variants are available with a load rating up to 16 A. The exact plug and socket type depends on the ordered WS523 variant.

Milesight MS-S0424-GF is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 24 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s + 2 × SFP 1000 Mb/s, poe budget: 400 W.

Milesight MS-S0416-GF is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 16 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s + 2 × SFP 1000 Mb/s, poe budget: 250 W.

Milesight VS121-P is a wired occupancy sensor and people counter using AI algorithms to analyze presence and space utilization. It offers a wide field of view 190° × 112°, mounting at a height of 2,3–4 m and recognition accuracy up to 98% according to the current datasheet. It supports Regional People Counting, Dwell Time, bidirectional people counting, U-turn Filtering and People Flow Analysis.

Version VS121-P uses 10/100 Mb/s Ethernet and 802.3af PoE, so data transmission and power can be provided over a single cable. It supports, among others, MQTT(S), HTTP(S), RTSP, NTP, SSH and BACnet/IP and has 1 × DI and 1 × DO. The device is intended for ceiling mounting in offices, conference rooms, retail stores and other spaces requiring occupancy analysis.

Milesight WS202-868M is a compact LoRaWAN PIR occupancy and light intensity sensor designed for smart offices, schools, warehouses, and Smart Building systems. The sensor detects movement at a range of up to 8 m, with a maximum detection field of 120° horizontally and 100° vertically.

The built-in light sensor operates within a range of 1–60 000 lx and makes it possible to determine Bright/Dark status according to a configured threshold. Milesight D2D support enables direct control of compatible devices, such as lighting, without using a LoRaWAN gateway. The 1650 mAh battery provides approximately 4,2 years of operation at SF7/EU868 under the manufacturer's test conditions.

Milesight EM500-PP-868M is a wireless LoRaWAN sensor designed for monitoring pressure in piping systems carrying liquids and gases. The G1/2M-4842 variant offers a measurement range of 0–16 bar, an accuracy of ±0,5% FS and a male G 1/2" process connection.

The 316L stainless steel probe is connected to a rugged LoRaWAN 868 MHz communication module. The device features local storage for 1000 records, threshold alarms, data retransmission and a 19 000 mAh battery providing up to 10 years of operation under the manufacturer's reference conditions.

Milesight GA01 is an outdoor omnidirectional fibreglass LoRaWAN® antenna designed to extend the range of Milesight gateways. The version 60 cm N-N (P/N: FNN600) operates in the 863–870 MHz and 902–928 MHz bands and provides a gain of 4–5 dBi. The antenna uses an N-type connector and is compatible, among others, with gateways UG65, UG65H and UG67.

The kit includes a 600 mm antenna and a 1 m RF cable terminated with N connectors. The omnidirectional radiation pattern makes the GA01 well suited to extending LoRaWAN® network coverage around a gateway, particularly in industrial and outdoor installations where the antenna needs to be positioned in a more favourable location.

Milesight AT101-868M is an industrial LoRaWAN asset tracker designed for monitoring vehicles, machinery, containers, equipment, and other valuable assets. The device uses GNSS and Wi-Fi network scanning, providing positioning even in locations where the satellite signal is limited.

The AT101 supports geofencing, motion and tilt detection, and a tamper alarm, three tracking modes, and storage for 1000 records with data retransmission. The IP67 enclosure and IK09 mechanical resistance enable operation in demanding environments, while four replaceable 2700 mAh batteries provide more than 15 years of operation with two position updates per day under the manufacturer's test conditions.

Milesight VS125-O-L0BEU is an outdoor people counter using AI and 3D stereo vision with two 4 MP sensors. The device achieves counting accuracy of up to 99,8%, operating at a height of 2,2–6 m and offers a field of view 101° × 70°. It supports bidirectional counting, Regional People Counting, Dwell Time, Group Counting, Staff Detection, child/adult differentiation, Gender Recognition and Heat Map.

Version VS125-O-L0BEU uses 4G LTE Cat 1 with a Nano SIM card and supports, among other protocols, MQTT/MQTTS and HTTP/HTTPS. The IP67 housing and operating temperature from −20 to +65°C allow the device to be used outdoors and in demanding semi-open spaces. Built-in IR illumination also enables operation at 0 lx.

Milesight VS125-O-P is a professional outdoor AI people counter using two 4 MP sensors, 3D stereo vision and deep learning algorithms. The device achieves counting accuracy of up to 99,8%, operates at a mounting height of 2,2–6 m and offers a field of view 101° × 70°. It supports, among other features, bidirectional counting, Regional People Counting, Dwell Time, Group Counting, Heat Map, Staff Detection and child/adult differentiation.

Version VS125-O-P has an IP67 housing designed for outdoor applications and a 10/100 Mbps Ethernet port with 802.3af PoE, so data transmission and power can be provided through a single cable. The device supports, among other protocols, MQTT/MQTTS, HTTP/HTTPS, 802.1X, OpenVPN and BACnet/IP, has DI/DO and local storage for up to 1,000,000 records.

Milesight EM400-MUD-N03GL, PN: B045-2 is a multifunctional ultrasonic distance and fill-level sensor with NB-IoT / LTE Cat M1 and GNSS positioning. It enables non-contact measurement across a wide range of 3–450 cm, with 1 mm resolution and a small blind zone. It was designed especially for monitoring medium and large waste containers, but can also be used for general distance and level measurements.

The EM400-MUD features 3-axis accelerometer for tilt detection and an NTC sensor enabling, among other things, detection of elevated temperature inside the container. The IP67 enclosure, two replaceable 9000 mAh ER26500 batteries, NFC configuration, GNSS, and direct cellular communication enable autonomous monitoring systems without a LoRaWAN gateway.

Milesight VA04 MSB-R/B is a multifunctional staff badge designed for use with Milesight VS125 Seriespeople counters. The distinctive badge pattern is recognized by the Staff Detection function, allowing employee passages to be automatically separated from customer traffic and excluded from visitor statistics.

VA04 can be worn on the chest or shoulder and uses magnetic fastening, with an optional pin-back version. It is available in Red & White and Black & Whiteversions. When worn on the chest, one badge is sufficient, while in shoulder mode the manufacturer requires marking both shoulders. Required VS125 counter firmware: V1.0.4 or later.

Milesight VB01 is a multifunctional adjustable mounting bracket designed for installing Milesight people counters on a ceiling or lintel. The telescopic design allows the sensor mounting height to be adjusted, while the adjustable head enables tilt up to 90° and 360° rotation. The bracket is made of corrosion-resistant aluminium and is available in white or black.

VB01 is available in a short version with an adjustment range of 0,4–0,6 m and an optional long version of 2,05–3 m. It is compatible with VS125 Series, VS133 Series, VS135 Series, VS126 and VS351; an additional mounting plate is used for the VS133 Series. The design supports ceiling and lintel mounting and precise positioning of the sensor relative to the monitored passage.

Milesight UC502-868M, PN: EA is a battery-powered multi-interface LoRaWAN® IoT controller designed to integrate wired sensors, meters and industrial devices in field installations. It offers 2 configurable GPIO ports, 2 4–20 mA or 0–10 V analogue inputs, switchable interface RS232/RS485 with Modbus RTU support and SDI-12 V1.4. Variant 868M supports EU868, IN865 and RU864, while the version EA has an SMA Female 50 Ω for an external LoRaWAN® antenna.

UC502 is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each or externally with voltage 5–24 V DC. The controller supports LoRaWAN® OTAA/ABP Class A, threshold alarms and value-change alarms, local data storage and retransmission of stored measurements. The sealed enclosure IP68, operating temperature range −30…+70°C, configuration via NFC and USB Type-C and wall or pole mounting allow the device to be used in demanding telemetry, agricultural and environmental systems.

Milesight UC502-868M is a battery-powered, multi-interface LoRaWAN® IoT controller with internal antenna, designed to integrate wired sensors, meters and industrial devices. The device offers 2 × GPIO, 2 analogue inputs 4–20 mA / 0–10 V, switchable interface RS232/RS485 with Modbus RTU, SDI-12 V1.4 and 3,3 V and 5/9/12 V power outputs. The variant 868M supports, among others, the European EU868 band, providing transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

UC502-868M is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each or with external voltage 5–24 V DC. It supports LoRaWAN® OTAA/ABP Class A, threshold alarms and value-change alarms, local storage of up to 600 records and data retransmission after connectivity is restored. Configuration via NFC, USB Type-C or downlink, the enclosure IP68, temperature range −30…+70°C and wall or pole mounting make it a universal telemetry node for demanding field installations.

Milesight WS203-868M is a wireless LoRaWAN occupancy, temperature, and humidity sensor designed for smart offices, buildings, hospitals, and other spaces requiring room utilisation monitoring. The PIR sensor detects movement at a range of up to 6 m, while interchangeable covers allow the detection field to be adapted to the installation location.

The WS203 measures temperature within a range of −20…+60°C with a typical accuracy of up to ±0,2°C and humidity from 0–100% RH with a typical accuracy of ±2% RH. The device features storage for 1000 records, data retransmission, Milesight D2D, NFC configuration, and a 4000 mAh battery providing up to approximately 10,7 years of operation under EU868/SF7 test conditions.

Milesight UG63-868M is compact, 8-channel LoRaWAN® gateway designed for small and medium-sized IoT installations and for extending coverage in areas with weaker radio coverage. Variant 868M supports the European EU868 plan, operates in Half-Duplex mode, achieves sensitivity down to −140 dBm at 292 bps and a maximum transmit power of 27 dBm. As a packet forwarder, it can support approximately 2000 LoRaWAN® Class A/B/C devices, while the built-in Network Server can locally support up to 20 Class A/C devices and forward their data via MQTT.

UG63-868M is a variant without an LTE cellular modem, therefore communication with the Network Server or IoT platform is provided via Ethernet 10/100 Mb/s. 2,4 GHz Wi-Fi in Access Point mode is used to configure the device. The gateway has an external LoRaWAN® antenna connector, OpenVPN Client, Packet Filter and data retransmission, and can be powered via USB-C 5 V / 2 A or 5–12 V DC. Optionally, IEEE 802.3af PoE power is also possible when a suitable splitter is used. The IP30 enclosure measures Ø115 × 21 mm and weighs approximately 140 g.

Milesight WS303-868M is a compact wireless LoRaWAN water leak sensor designed for rapid detection of conductive liquids. The built-in probes respond at a liquid level of approximately 0,5 mmwhile leak detection can be indicated locally by a buzzer and remotely through the monitoring system.

The device features an enclosure rated IP67supports Milesight D2D, and can directly trigger a compatible automation component, such as a valve controller. The replaceable CR2450 590 mAh battery provides up to approximately 5,7 years of operation, while the compact dimensions of 63 × 63 × 14 mm allow the sensor to be installed even in confined spaces.

Milesight FT101-868M is a portable field tester designed for measuring, analysing and optimising LoRaWAN® network coverage in the EU868 band. The device enables real-time monitoring of key connection parameters such as RSSI, SNR, packet loss, Spreading Factor and transmit power, helping select optimal installation locations for gateways and end devices. The colour touchscreen 5,72" with a resolution of 1440 × 720 px, receiver sensitivity down to −137 dBm and maximum transmit power 16 dBm for 868 MHz enable convenient measurements directly at the planned deployment location.

FT101 also offers channel noise scanning, Ping-Pong tests, recording measurement points with GNSS position and report export via USB Type-C. The device runs Android 12, has 4 GB RAM, 64 GB storage, Wi-Fi, Bluetooth 4.0 BLE, NFC and a microSD slot up to 256 GB. The built-in battery 4300 mAh provides approximately 8 hours of active operation, and the IP65 enclosure and temperature range −10…+50°C allow the tester to be used during field commissioning and servicing of LoRaWAN® installations.

Milesight EM300-MLD-868M is a membrane LoRaWAN liquid leak sensor designed for monitoring larger surfaces at risk of flooding. The flexible detection film measuring 400 × 400 mm detects the presence of conductive liquids such as water, weak acids, and weak alkalis.

The device is suitable for applications including beneath equipment, server rooms, warehouses, technical cabinets, and water installations. The IP67 enclosure, storage for 1000 records, data retransmission, Milesight D2D, and replaceable 4000 mAh battery provide reliable monitoring and rapid response to detected leaks.

Milesight SS21 PN03-150 is a magnetic reed switch sensor designed to detect the opening and closing of doors, covers, or other movable elements when used with Milesight TS301 and TS302 devices. The sensor consists of two magnetic elements measuring 31 × 14 × 7,5 mm, and its detection distance is approximately 20–30 mm.

The SS21 PN03-150 features a 1,5 m cable and can be mounted using screws or 3M tape. When connected to the TS301 or TS302, it enables the open/closed state to be recorded and information to be transmitted through the LoRaWAN system of the main device. With the TS302, a PT100 temperature probe and the SS21 magnetic sensor can be used simultaneously.