Energy Metering

Phoenix Contact SCK-C-MODBUS-10PCS 1084335 is a package of 10 SOLARCHECK communication modules designed to collect data from photovoltaic-installation measurement modules. Each communication module can support up to 8 SCK measurement modules and transmit collected values to the supervisory system via the RS-485 with Modbus RTU protocol.

The module is powered with 21,6–30 V DC and can simultaneously power the connected measurement modules. It supports Modbus RTU transmission at speeds up to 38,4 kbit/s over a distance up to 1200 m, has a digital input for monitoring remote signaling contacts of surge protection and a temperature monitoring function. The 22,5 mm-wide housing is intended for DIN-rail mounting.

Phoenix Contact EEM-SB371-C 1158947 is a multifunction energy meter from the EMpro family, designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device has no local display and uses direct inputs for Rogowski coils, enabling current measurement up to 400 A or 4000 A, True RMS measurement and harmonic analysis up to the 63rd harmonic.

Model The EEM-SB371-C has 10/100 Mb/s Ethernet with Modbus TCP, REST and MQTT for direct connection to Proficloud.io. Active energy is measured in class 1 according to IEC 62053-21, and reactive energy in class 2 according to IEC 62053-23. The power supply is 100–230 V AC ±20% or 150–250 V DC ±20%, and the device is intended for DIN-rail mounting.

Phoenix Contact EEM-MA771-EIP 2908302 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device enables direct connection of Rogowski coils, supports current measurement up to 400 A or 4000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has EtherNet/IP™ with two RJ45 ports and DLR support and an additional Ethernet interface with Modbus TCP and REST. Voltage measurement accuracy is 0,02%, current accuracy is 0.5%, and active energy meets class 1 according to IEC 62053-21, while the 96 × 96 mm panel design is equipped with a backlit, two-color LCD display.

Phoenix Contact EEM-MA770-EIP 2907953 is a multifunction network parameter meter from the EMpro family designed for energy measurement and monitoring in low-voltage installations up to 690 V AC. The device works with 1 A or 5 A current transformers and enables primary current configuration up to 20 000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has EtherNet/IP™ with two RJ45 ports and DLR support and an additional 10/100 Mb/s Ethernet interface with Modbus TCP and REST. Voltage and current measurement accuracy is 0,2%, active energy meets class 0.5 S according to IEC 62053-22, and the 96 × 96 mm panel design is equipped with a backlit, two-color LCD display.

Phoenix Contact EEM-PM157-SLP 1269236 is a certified DC energy meter designed primarily for billing-grade energy measurement in DC charging stations. The device performs direct measurement of voltage 150–1000 V DC and current 6.5–650 A, offering accuracy class B according to EN 50470-3 and class 1 according to IEC 62053-41.

The meter has RS-485 with SLIP protocol, supports charging cable loss correction, stores more than 225,000 charging processes and more than 2500 calibration log entries. The operating temperature range is −40…+80°C, and the device complies, among others, with OCMF 1.0, PTB-A 20.1 and PTB-A 50.7.

Phoenix Contact EEM-MB371-EIP 2907976 is a multifunction energy meter from the EMpro family, designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device has no local display and uses direct inputs for Rogowski coils, enabling current measurement up to 400 A or 4000 A, True RMS measurement and harmonic analysis up to the 63rd harmonic.

Version The EEM-MB371-EIP has a total of 3 Ethernet ports: two RJ45 ports for EtherNet/IP™ with DLR support and an additional 10/100 Mb/s Ethernet interface with Modbus TCP and REST. Active energy is measured in class 1 according to IEC 62053-21, the power-supply range is 100–230 V AC ±20% or 150–250 V DC ±20%, and the device is intended for DIN-rail mounting.

Phoenix Contact EEM-MB370-EIP 2907971 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device works with 1 A or 5 A current transformers and allows the primary current to be configured up to 20 000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

Version EEM-MB370-EIP does not have a local display and is equipped with EtherNet/IP™, Modbus TCP and RESTcommunication. The two EtherNet/IP™ ports are designed to operate in DLR topology, and voltage and current measurement accuracy is 0,2%, active energy meets class 0.5 S according to IEC 62053-22, and the device is designed for DIN-rail mounting.

Phoenix Contact ECM-UC-100A-MTCP 1191984 is a configurable current transducer designed for measurement of AC, DC and distorted currents. The device supports measurement ranges up to 100 A AC/DC, and the maximum configurable input value is 125 A AC/DC. The maximum transmission error is 0,5%, and the measurement bandwidth can be set up to 1000 Hz.

Version The ECM-UC-100A-MTCP has an RJ45 Ethernet interface with Modbus TCP and USB-C enabling configuration through the built-in web interface even without an external 24 V DC power supply. The supply range is 9,6–30 V DC, the device has Push-in terminals, an 11 mm feed-through opening for the measured conductor and can operate at temperatures of −40…+60°C.

Phoenix Contact EEM-MA771-R 2908285 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device enables direct connection of Rogowski coils, supports current measurement up to 400 A or 4000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has 10/100 Mb/s Ethernet with Modbus TCP and REST plus RS-485 with Modbus RTU, enabling compatibility with both networked and serial automation systems. Voltage measurement accuracy is 0,2%, current 0.5%, active energy meets class 1 according to IEC 62053-21, and the panel meter has a backlit, two-color LCD display.

Phoenix Contact EEM-MA770-R 2907944 is a multifunction energy meter from the EMpro family designed for measurement and monitoring of electrical parameters in low-voltage installations up to 690 V AC. The device supports single-, two- and three-phase networks, performs continuous TRMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has Ethernet with Modbus TCP and REST API and RS-485 interface with Modbus RTU, enabling compatibility with both modern Ethernet systems and devices using serial communication. Voltage and current measurement is performed with an accuracy of 0,2%, active energy meets class 0.5 S according to IEC 62053-22, and the operating temperature range is −25…+70°C.

Phoenix Contact ECM-UC-10A-MTCP 1191970 is a configurable current transducer designed for measurement of AC, DC and distorted currents. The device offers four basic measurement ranges of 0–0.1 A, 0–1 A, 0–5 A and 0–10 A AC/DC, and the maximum configurable input range is up to 12.5 A in accordance with IEC/EN 61010-1.

Version ECM-UC-10A-MTCP has an RJ45 Ethernet interface with Modbus TCP and USB-C enabling configuration via the built-in web interface even without external 24 V DC power. The maximum transmission error is 0,5%, supply range 9.6–30 V DC, and the compact 22.6 mm wide module has Push-in terminals and can operate at a temperature of −40…+60°C.

Phoenix Contact EEM-MA771-24DC 1127060 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device enables direct connection of Rogowski coils, supports current measurement up to 400 A or 4000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

Version EEM-MA771-24DC is powered by 24 V DC within the range 18–30 V DC and has 10/100 Mb/s Ethernet with Modbus TCP, REST API and MQTT. Voltage measurement accuracy is 0,2%, current 0.5%, active energy meets class 1 according to IEC 62053-21, and the panel meter has a backlit, two-color LCD display.

Phoenix Contact EEM-MA371-R 2907985 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device enables direct connection of Rogowski coils and supports current measurement ranges up to 400 A or 4000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has 10/100 Mb/s Ethernet with Modbus TCP and REST API plus RS-485 with Modbus RTU, allowing integration with both networked and serial automation systems. Voltage measurement accuracy is 0,2%, current 0.5%, active energy meets class 1 according to IEC 62053-21, and the operating temperature range is −25…+70°C.

Phoenix Contact EEM-MA770-24DC 1127052 is a multifunction energy meter from the EMpro family designed for measurement and monitoring of electrical parameters in low-voltage installations up to 690 V AC. The device supports single-, two- and three-phase networks, performs continuous TRMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter is powered by 24 V DC, works with 1 A or 5 A current transformers and enables measurement of primary currents up to 20 000 A. It has 10/100 Mb/s Ethernet with Modbus TCP, REST API and MQTT, a backlit two-color LCD display, and voltage and current measurement is performed with an accuracy of 0,2%.

Phoenix Contact EEM-MA370-R 2907980 is a multifunction network-parameter meter from the EMpro family designed for energy measurement and monitoring in low-voltage installations up to 690 V AC. The device supports single-, two- and three-phase networks, performs continuous TRMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has Ethernet with Modbus TCP and REST API plus an RS-485 interface with Modbus RTU, enabling integration with both networked and serial automation systems. Voltage and current measurement is performed with an accuracy of 0,2%, active energy meets class 0.5 S according to IEC 62053-22, and the device is designed for DIN-rail mounting and operation at −25…+70°C.

Phoenix Contact EEM-MA771 2908286 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device enables direct connection of Rogowski coils, supports current measurement up to 400 A or 4000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has Ethernet 10/100 Mb/s with Modbus TCP and REST, a backlit, two-color LCD display, and a 24 V DC digital input and output. Voltage measurement accuracy is 0,2%, current 0.5%, active energy meets class 1 according to IEC 62053-21, and the 96 × 96 mm panel enclosure is designed for installation in the front panel of a distribution board.

Phoenix Contact EEM-MA770 2907945 is a multifunction energy meter from the EMpro family designed for measurement and monitoring of electrical parameters in low-voltage installations up to 690 V AC. The device supports single-, two- and three-phase networks, performs continuous TRMS measurement and analyzes harmonics up to the 63rd harmonic.

The meter has 10/100 Mb/s Ethernet with Modbus TCP and REST API, a 24 V DC digital input and output, and a backlit, two-color LCD display. Voltage and current measurement is performed with an accuracy of 0,2%, active energy meets class 0.5 S according to IEC 62053-22, and the operating temperature range is −25…+70°C.

Phoenix Contact ECM-UC-100A-UI-REL 1698172 is a configurable current transducer designed for measurement of AC, DC and distorted currents. The device enables measurement of alternating current from 0–100 A and direct current from −100…+100 A, while the maximum configurable measurement range is up to 125 A AC/DC. The maximum transmission error is 0.5%.

The meter has a configurable analog output 0/4–20 mA or 0–10 V and other voltage ranges, a relay output with one changeover contact and a digital output. Configuration is performed via USB-C and built-in web interface even without an external 24 V DC power supply. The supply range is 9.6–30 V DC, and the device has Push-in terminals and operates at a temperature of −40…+60°C.

Phoenix Contact EEM-MA371-24DC 1127058 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device enables direct connection of Rogowski coils, supports current measurement up to 400 A or 4000 A, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic.

Version EEM-MA371-24DC is powered by 24 V DC in the range 18–30 V DC and has 10/100 Mb/s Ethernet with Modbus TCP and REST API. Voltage measurement accuracy is 0,2%, current 0.5%, active energy meets class 1 according to IEC 62053-21, while the device has a backlit, two-color LCD display and is designed for DIN-rail mounting.

Phoenix Contact EEM-MA370-24DC 1127059 is a multifunction energy meter from the EMpro family designed for measurement and monitoring of electrical parameters in low-voltage installations up to 690 V AC. The device supports single-, two- and three-phase networks, performs continuous True RMS measurement and analyzes harmonics up to the 63rd harmonic and works with 1 A or 5 A current transformers.

Version EEM-MA370-24DC is powered by 24 V DC within the range 18–30 V DC, making it easy to integrate with typical automation cabinets. The meter has 10/100 Mb/s Ethernet with Modbus TCP and REST API, a backlit two-color LCD display, voltage and current measurement accuracy of 0,2% and active energy class 0.5 S according to IEC 62053-22.

Phoenix Contact EEM-MA371 2908307 is a multifunction energy meter from the EMpro family designed for measurement of electrical parameters in low-voltage installations up to 690 V AC. The device performs continuous TRMS measurement and analyzes harmonics up to the 63rd harmonic and enables direct connection of Rogowski coils.

The meter supports current measurement up to 400 A or 4000 A depending on the selected measurement range, and current measurement accuracy is 0.5%. The device has 10/100 Mb/s Ethernet with Modbus TCP and REST API, a backlit two-color LCD display, a 24 V DC digital input and output, and is designed for DIN-rail mounting and operation at −25…+70°C.

Phoenix Contact EEM-MA370 2907983 is a multifunction energy meter from the EMpro family designed for monitoring of electrical parameters in low-voltage installations up to 690 V AC. The device supports single-, two- and three-phase networks, performs TRMS measurement and records harmonics up to the 63rd harmonic.

The meter has a built-in Ethernet with Modbus TCP and REST API, a backlit two-color LCD display and an integrated web server that facilitates configuration and commissioning. Voltage is measured directly up to 690 V AC, and current through 1 A or 5 A current transformers; voltage and current measurement accuracy is 0,2%, while active energy meets class 0.5 S according to IEC 62053-22.

Phoenix Contact ECM-UC-100A-MRTU 1191986 is a configurable current transducer designed for measurement of direct, alternating and distorted currents. The device supports measurement ranges up to 125 A AC/DC, allows the measured conductor to be routed directly through the housing and provides a maximum transmission error of 0,5%.

Version ECM-UC-100A-MRTU has an interface RS-485 with Modbus RTU and USB-C enabling configuration through the built-in web interface even without a connected 24 V DC power supply. The transducer is powered with 9,6–30 V DC, has safe isolation in accordance with IEC/EN 61010-1, Push-in connectors and can operate at a temperature of −40…+60°C.

Phoenix Contact ECM-UC-10A-UI-REL 1698164 is a configurable current transducer designed for measurement of AC, DC and distorted currents. The device offers four basic measurement ranges 0–0,1 A, 0–1 A, 0–5 A and 0–10 A AC/DC, while the maximum configurable input value is 12,5 A AC/DC. The maximum transmission error is 0,5%, and the measurement bandwidth can reach 1000 Hz.

Version The ECM-UC-10A-UI-REL has a configurable analog voltage or current output, a relay output with one changeover contact and a 24 V DC digital output. Configuration is performed via USB-C and the built-in web interface even without an external power supply. The supply range is 9,6–30 V DC, the device has Push-in terminals and can operate at temperatures −40…+60°C.