Automation and Infrastructure

Phoenix Contact 1085123 – NS 35/15 AL UNP 481MM 2X5,5 is an aluminium DIN rail with a profile of 35 × 15 mm and a length of 481 mm, designed for mounting terminal blocks, relays, automation modules, power supplies, and other equipment compatible with the standard 35 mm rail. This variant has 2 mounting holes, 5,5 mm and is supplied as a ready-to-use section for direct installation in control cabinets and switchboards.

The lightweight aluminium construction simplifies installation and reduces assembly weight while maintaining stable support for devices. The minimum order quantity is 100 pcs. Each piece is a single 481 mm rail section.

Milesight VB02 is an adjustable ceiling bracket designed for mounting compatible Milesight people counters. The articulated design enables device tilt through 90° and 360° rotation, allowing the sensor operating direction to be precisely set even when standard mounting parallel to the ceiling does not provide the required detection field.

The bracket is made of lightweight, corrosion-resistant aluminium, and the standard threaded interface 1/4 inch simplifies installation of a compatible device. VB02 is designed for models VS125 Series, VS135 Series and VS126, is white and weighs approximately 93 g.

Milesight SP12-125-150 is an external digital temperature probe DS18B20 designed for independent calibration and operation with Milesight TS201, TS602 and TS301 V2 / TS302 V2 devices. The measurement range is −40…125°C, while according to the manufacturer's current datasheet the accuracy is ±0,5°C within −10…85°C and ±2°C outside this range.

The probe has a PVC cable with a length of 1,5 m and a straight 316 stainless steel measuring tip with dimensions Ø6 × 50 mm and an IP67 protection rating. The SP12-125-150 is designed exclusively for temperature measurement and is suitable for applications including cold rooms, refrigerated transport, warehouses, pharmaceuticals, and industrial process monitoring.

Milesight SP11 B05-125-200 is a standard temperature probe Class B PT100 designed to work with Milesight TS301, TS302 and TS602 devices. The measurement range is −40…125°C, with a typical accuracy of ±0,5°C within −40…40°C and ±1°C for temperatures from 40…125°C. The probe is suitable for monitoring cold rooms, warehouses, pharmaceutical and food applications, and other installations requiring an external temperature measurement point.

The measuring tip is made of 304 stainless steel measures Ø4 × 50 mm and has an IP67 protection rating. SP11 B05-125-200 features a 2 m PVC cable and can be used for contact measurement or together with the optional Milesight TB3984 buffer bottle, which stabilises measurements in refrigeration and cold-chain applications.

Milesight VC01 is a flush-mount cover designed for people counters Milesight VS125 / VS125-LW. It enables the device to be installed neatly in a suspended ceiling, so the sensor enclosure remains nearly flush with the ceiling surface and has less visual impact on the interior.

VC01 is made from durable plastic PC + ABS resistant to environmental ageing. The cover has a diameter of 210 mm, a height of 40 mm, and weighs approximately 130 g. It is available in white or black and is supplied with the mounting components required for installation.

Milesight SS21 PN03-150 is a magnetic reed switch sensor designed to detect the opening and closing of doors, covers, or other movable elements when used with Milesight TS301 and TS302 devices. The sensor consists of two magnetic elements measuring 31 × 14 × 7,5 mm, and its detection distance is approximately 20–30 mm.

The SS21 PN03-150 features a 1,5 m cable and can be mounted using screws or 3M tape. When connected to the TS301 or TS302, it enables the open/closed state to be recorded and information to be transmitted through the LoRaWAN system of the main device. With the TS302, a PT100 temperature probe and the SS21 magnetic sensor can be used simultaneously.

PFXBLUEBTB1SM is a build-time licence for Pro-face BLUE in the Basic edition. The variant includes 1 workstation and has a licence term of 1 month.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

Pro-face PFXZCBCNDC2 is an angled spring-clamp DC power connector designed for connecting power wires to compatible Pro-face panels and Display Modules. The connector has three terminals: + for DC power, − for 0 V, and FG for functional earth, while the angled design simplifies cable routing behind the panel in confined cabinet spaces.

One package PFXZCBCNDC2 contains 5 angled DC power connectors. The accessory is used with SP5000 Series Display Modules (except 7″ Wide), FP5000 panels, and selected GP4000 models including GP-4500 and GP-4600. The spring terminals are designed for conductors with a cross-section of 0,75–2,5 mm² (AWG 18–13).

Pro-face PFXZCFUV61 is a UV protective film designed for Pro-face operator-panel displays in the format 5,7″. Its purpose is to reduce the effect of ultraviolet radiation on the display surface, which is particularly useful in applications exposed to intense natural or artificial light.

PFXZCFUV61 is an official Pro-face accessory compatible, among others, with GP-430xT, GP-4301TW, GP-4301TM, ST-6300TA and STC-6300TA. The film is applied directly to the display surface and is a dedicated UV solution — it should not be confused with the standard PFXZCBDS61 dirt-protection film or the PFXZCBOP61 environmental cover.

Milesight SP13-125-150 is an external probe for simultaneous measurement of temperature and relative humidity, designed to work with Milesight TS602 and TS301 V2 / TS302 V2 sensors. The temperature measurement range is −40…125°C, and the humidity range is 0…100% RH. Temperature accuracy reaches ±0,2°C within 0…65°C, while humidity measurement accuracy is ±2% RH.

The probe has a PVC cable with a length of 1,5 m and a straight 304 stainless steel measuring tip with dimensions Ø6 × 50 mm and an IP67 protection rating. The SP13-125-150 is suitable for applications including cold rooms, chambers, warehouses, refrigerated transport, and other installations requiring temperature and humidity monitoring at a point remote from the main device.

Milesight SP11 A03-050-150 is a precision temperature probe Class A PT100 designed for measurements at very low temperatures. The measurement range extends to −200…50°C, with a typical accuracy of ±0,5°C within −175…50°C and ±0,55°C within −200…−175°C. The probe is designed to work with Milesight TS301, TS302 and TS602 devices.

The measuring tip is made of 304 stainless steel measures Ø4 × 30 mm and has an IP67 protection rating. The Teflon cable with a length of 1,5 m can operate at temperatures from −200 to 290°C, making the SP11 A03-050-150 suitable for low-temperature chambers, refrigeration, laboratories, and other applications requiring temperature measurement far below 0°C.

Milesight SP11 AF10-125-150 is a food-grade temperature probe Class A PT100 designed for direct temperature measurement of products and media within the range −40…125°C. The typical accuracy is ±0,4°C. The slim 316 stainless steel Food Grade needle tip measures Ø4 × 100 mm and has an IP67 protection rating, making the probe suitable for food, refrigeration, and laboratory applications.

The SP11 AF10-125-150 features a 1,5-metre Food Grade silicone cable rated for temperatures from −60 to 250°C. The Insert Installation design allows the probe to be placed directly in the monitored product. The accessory is designed to work with Milesight devices TS301, TS302 and TS602.

PFXWRT001A is a licence BOS Web Viewer Runtime covering 1 licence. It is used to run web-based viewing of applications prepared in the BLUE Open Studio environment.

The variant is intended for scaling access to visualisation through a browser or Web Viewer component according to the project architecture. The number of licences follows directly from the product code.

Milesight VB01 is a multifunctional adjustable mounting bracket designed for installing Milesight people counters on a ceiling or lintel. The telescopic design allows the sensor mounting height to be adjusted, while the adjustable head enables tilt up to 90° and 360° rotation. The bracket is made of corrosion-resistant aluminium and is available in white or black.

VB01 is available in a short version with an adjustment range of 0,4–0,6 m and an optional long version of 2,05–3 m. It is compatible with VS125 Series, VS133 Series, VS135 Series, VS126 and VS351; an additional mounting plate is used for the VS133 Series. The design supports ceiling and lintel mounting and precise positioning of the sensor relative to the monitored passage.

Milesight CS0X/CSOX is a solar panel designed to work with compatible Milesight UC50x controllers, particularly variants intended for battery and solar power.

The manufacturer offers pole- and wall-mounting variants. The panel can power an outdoor IoT node without a permanent grid connection, for example in telemetry, agriculture, or infrastructure monitoring.

Milesight SP11 A05-500-150 is an industrial temperature probe Class A PT100 designed for measurements across a wide range from −50 to 500°C. The typical accuracy is ±0,4°C within −50…125°C and ±1,15°C at 125…500°C. The probe is designed to work with Milesight TS301, TS302 and TS602 devices.

The measuring element is housed in a straight sleeve made of 304 stainless steeland the fibreglass cable with a length of 1,5 m is rated for operation at temperatures up to 500°C. The SP11 A05-500-150 is suitable for industrial installations, furnaces, heating equipment, technological processes, and other applications requiring high-temperature measurement.

Pro-face PFXZCBDS72 is an original protective film designed for 7-inch widescreen Pro-face HMI displays. It forms a replaceable layer protecting the display surface against dirt generated during everyday operator-panel use.

One package contains 5 replaceable protective sheets. PFXZCBDS72 is compatible, among others, with GP-4401WW and STM-6400WA, and the manufacturer also uses it as an accessory for 7-inch mobile GPH6000 panel versions. It is a standard protective film — a separate PFXZCFUV72 variant is intended for UV protection.

Pro-face PFXZCBDS71 is an original protective film designed for 7-inch / 7,5-inch Pro-face operator-panel displays. It forms a replaceable layer protecting the display surface against dirt generated during everyday HMI operation. The manufacturer currently uses this part number, among others, for the panel GP6000 PFXGP6400TAD, and in the earlier GP4000 Series for the model GP-4401T.

One package PFXZCBDS71 contains 5 replaceable protective sheets. The film is a consumable and can be replaced with another sheet when soiled or worn. It is a standard dirt-protection film — for UV protection the manufacturer provides a separate variant PFXZCFUV71.

PFXBLUEBTP1SM is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 1 workstation and has a licence term of 1 month.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

Pro-face PFXZCDDS102 is an original protective film designed for 10-inch widescreen Advanced Display Modules of the SP5000 Series. It forms an additional layer protecting the screen surface against dirt generated during everyday operator-panel use.

One package contains 5 replaceable protective sheets. PFXZCDDS102 is compatible, among others, with Pro-face SP-5500WA (PFXSP5500WAD). It is a standard dirt-protection film — for ultraviolet protection the manufacturer provides a separate variant PFXZCFUV102.

Phoenix Contact 1088495 is an industrial power supply from the STEP POWER family, with 1-phase AC input and 24 V DC / 0,63 A.

The device is designed for reliable power supply of automation systems, controllers, industrial networks, and machine electronics. The product family is designed for industrial installation; exact diagnostic functions and power reserves depend on the variant.

PFXBLUEBTE1SM is a build-time licence for Pro-face BLUE in the Enterprise edition. The variant includes 1 workstation and has a licence term of 1 month.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

<p>

    <strong>Pro-face PFXZCDDS122</strong> is an original screen protective film designed for <strong>12-inch widescreen Pro-face operator panels</strong>. It protects the display surface against dirt and everyday wear during HMI operation, helping reduce the need for direct cleaning of the screen surface.

</p>

<p>

    One package contains <strong>5 single-use protective sheets</strong>. PFXZCDDS122 is compatible, among others, with <strong>SP-5600WA, ST-6600WA, STW-6600WA and ET-6600WA</strong>. It is a standard dirt-protection film — for ultraviolet protection the manufacturer provides a separate PFXZCFUV122 variant.

</p>

Pro-face PFXZC3DS151 (CA3-DFS15-01) is an original protective film designed for 15-inch displays of Pro-face operator panels and industrial monitors. The sheet protects the display surface against dirt, and manufacturer documentation also indicates reduced light reflections, improving screen readability in bright environments.

One package contains 5 replaceable protective sheets. PFXZC3DS151 is still used, among others, with 15-inch GP6000 Series Display Modules, and also appears in documentation for older SP5000, PS4000, FP3000 and GP/ST3000 devices. It is a standard protective film — the UV variant for 15-inch displays is designated PFXZCFUV151.