Milesight

Milesight RCT-1000 is a split-core current transformer Split-Core CT designed for use with the energy monitoring hub Milesight CTH01. The RCT-1000 variant enables current measurement in the range 0–1000 A, offers accuracy class 0.5 and has a measurement opening with a diameter of Ø51 mm.

The split-core design allows the transformer to be installed around an existing conductor without cutting it, while the RJ11 connection allows the sensor to be connected directly to one of the 12 CTH01 current channels. The transformer is designed for monitoring high loads, main supply circuits, distribution boards and industrial installations.

Milesight MS-S0216-GL is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 16 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s, poe budget: 200 W.

Milesight UC300-L05EU is an industrial IoT controller in the cellular 4G LTE Cat.1version, designed for remote data collection, monitoring and control of devices equipped with various industrial interfaces. The model offers 4 digital inputs, 2 relay outputs, 2 4–20 mA inputs, 2 0–10 V inputs, 2 PT100 RTD inputs, RS232 and RS485 with Modbus RTU. Variant L05EU is intended for the EMEA region and supports LTE FDD B1/B3/B7/B8/B20/B28A, WCDMA B1/B8 and GSM/EDGE B3/B8.

The controller can communicate directly with higher-level systems via TCP, UDP, MQTT, AWS, Milesight IoT Cloud and SMS, so no LoRaWAN® gateway is required. Support for IF-THEN rules and threshold alarms enables local automation actions even during temporary network connectivity loss. UC300-L05EU is powered with 5–24 V DC, operates at a temperature of −20…+60°C, has a metal IP30 enclosure and can be mounted on a desktop, wall or DIN rail.

Milesight EM500-LGT-868M is a wireless LoRaWAN sensor designed to measure light intensity within a range of 0–100 000 lx. Its rapid response to changes in lighting and design adapted for outdoor operation make the device suitable for applications including agriculture, horticulture and lighting control systems.

The separate light probe has a protection rating of IP65, while the communication module is IP67. The replaceable 19 000 mAh battery provides up to 10 years of operation, while LoRaWAN 868 MHz communication enables remote transmission of measurements to a central monitoring system.

Milesight CT305-868M is a smart three-phase LoRaWAN® current transformer designed for wireless RMS current measurement up to 500 A per measurement channel. The split-core design enables installation on existing conductors without disconnecting them, and one module can simultaneously monitor up to three phases or independent circuits. The device offers ±1% accuracy, 1 mA resolution and sampling at up to 3,3 kHz.

Variant CT305-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. It can be powered by energy induced directly from the monitored conductor or by 5 V via USB-C. It supports threshold and overrange alarms, an optional NTC cable temperature sensor and FUOTA updates. The CT305 transformer opening has a diameter of 36,5 mm.

Milesight HL31-L08EU-868M is a Wi-Fi HaLow gateway for automation and industrial infrastructure applications. A long-range gateway for transmitting IoT data, including images, using the IEEE 802.11ah standard.

Key data for this variant: radio standard: Wi-Fi HaLow IEEE 802.11ah, band: 850–950 MHz (EU 868 MHz variant), data rate: up to 32 Mb/s.

Milesight GS601-868M is a multi-sensor e-cigarette, smoke and air quality detector with LoRaWAN EU868communication. The device detects events related to vaping and smoking while simultaneously monitoring PM1.0, PM2.5, PM10, TVOC, temperature and humidity, enabling continuous monitoring of indoor conditions.

The GS601 has a local LED indicator and 70 dB buzzer, a vibration sensor for detecting tampering attempts, threshold alarms, NFC configuration and FUOTA remote update functionality. 5 V / 1 A power via USB-C or an optional PoE splitter and ceiling mounting make the device well suited to schools, restrooms, changing rooms, stairwells and other smoke-free areas.

Milesight UG56-868M is a compact, industrial 8-channel LoRaWAN® gateway designed for building IoT networks in industrial plants, buildings, warehouses and telemetry systems. Variant 868M supports the EU868, IN865 and RU864 plans, while in Poland the EU868plan is used. The gateway operates in Half-Duplex mode, achieves sensitivity down to −140 dBm at 292 bps, maximum transmit power of 27 dBm and can support approximately 2000 LoRaWAN® Class A/B/C devices at an uplink interval of 10 minutes. The external SMA Female 50 Ω connector allows selection of an antenna suited to installation conditions.

Version UG56-868M does not have the optional cellular modem, so communication with the higher-level system is provided via 10/100 Mbps Ethernet or 2,4 GHz Wi-Fi. The device has a built-in LoRaWAN® Network Server, Gateway Fleet, multicast, FUOTA, Noise Analyzer, Packet Filter and data retransmission, and supports integration via MQTT(S), HTTP(S), BACnet/IP, BACnet/SC and Modbus. A Quad-Core ARM Cortex-A35 1,3 GHz processor, 512 MB DDR3 RAM and 8 GB eMMC also enable the use of Node-RED and Python SDK. The gateway is powered via IEEE 802.3af PoE or USB-C 5 V / 2 A and has a metal IP30 enclosure measuring 110 × 75 × 24 mm.

The wireless Milesight EM500-CO2-868M sensor is designed to measure CO₂ concentration, temperature, humidity and atmospheric pressure. The IP65 enclosure enables operation even in demanding environmental conditions.

The device uses LoRaWAN 868 MHz communication, NDIR technology for CO₂ measurement and battery power enabling many years of wireless operation.

Milesight MS-S0416-GF is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 16 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s + 2 × SFP 1000 Mb/s, poe budget: 250 W.

Milesight EM400-UDL-868M, PN: C050 is a non-contact ultrasonic distance and level sensor with LoRaWAN EU868. The C050 variant enables measurement within a range of 0,25–5 m, with an accuracy of ±(1 + 0,3% × S) cm and 1 mm resolution, making it suitable for monitoring tanks, wells, sewerage, surface waters, and outdoor infrastructure.

The device features an enclosure IP67, a 3-axis accelerometer, an internal NTC temperature sensor, threshold alarm, calibration, and Tilt & Distance Switch. Two replaceable ER26500 Li-SOCl₂ batteries with 9000 mAh each provide more than 10 Years of Operation under the manufacturer's test conditions. Configuration is performed via NFC and the Milesight ToolBox app.

Milesight EM500-PP-868M is a wireless LoRaWAN sensor designed for monitoring pressure in piping systems carrying liquids and gases. The G1/2M-4842 variant offers a measurement range of 0–16 bar, an accuracy of ±0,5% FS and a male G 1/2" process connection.

The 316L stainless steel probe is connected to a rugged LoRaWAN 868 MHz communication module. The device features local storage for 1000 records, threshold alarms, data retransmission and a 19 000 mAh battery providing up to 10 years of operation under the manufacturer's reference conditions.

Milesight RRC-RJ11 is a flexible Rogowski coil for AC current measurement up to 4000 A, designed for use with the Milesight CTH01 Smart Power Monitor Hub. The large measurement opening Ø150 mm enables installation around large conductors and busbars, while measurement accuracy is ±2%.

The coil connects directly to a CTH01 measurement channel via an RJ11connector. It operates from −40 to +55°C, has insulation of 3 kV AC and a construction made of materials meeting UL94 V0. RRC-RJ11 is designed for energy consumption and electrical parameter monitoring systems with high current values.

Milesight MS-S0224-GL is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 24 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s, poe budget: 400 W.

Milesight UG56-L08GL-868M is an industrial, 8-channel LoRaWAN® gateway designed for IoT installations in industrial plants, buildings, warehouses and distributed telemetry systems. Variant 868M supports, among others, the European EU868 frequency plan, while the L08GL version is equipped with 4G LTE cellular communication. The UG56 uses a Quad-Core ARM Cortex-A35 1,3 GHz processor, 512 MB DDR3 RAM and 8 GB eMMC and supports approximately 2000 LoRaWAN® Class A/B/C devices with a typical uplink interval of 10 minutes.

The gateway offers 10/100 Mbps Ethernet with PoE, 2,4 GHz Wi-Fi and 4G LTE, while for LoRaWAN® it has an external SMA Female 50 Ω antenna connector. The built-in Network Server supports Gateway Fleet, multicast, FUOTA, custom codecs and integration via MQTT(S), HTTP(S), BACnet/IP, BACnet/SC and Modbus. Node-RED, Python SDK, WAN Failover and VPN technologies including OpenVPN, IPsec, WireGuard and others are also available. The metal IP30 enclosure measures 110 × 75 × 24 mm and enables desktop, wall and — in the newer hardware version — DIN-rail mounting.

Milesight EM410-RDL-868M is an industrial radar distance and level sensor with LoRaWAN EU868. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with 1 mm resolution, a narrow 8° beam, and accuracy reaching ±2 mm under optimal conditions.

The variant without an additional PN designation features an internal LoRaWAN antenna and a process connection G 1½". The IP68-rated PVDF enclosure, memory 2000 Records, data retransmission, level alarms, radar diagnostics, and a 3-axis accelerometer enable reliable monitoring of tanks, sewerage, wells, and water infrastructure.

Milesight EM400-UDL-N03GL, PN: C100 is a non-contact ultrasonic distance and level sensor with NB-IoT / LTE Cat M1 and built-in GNSS positioning. The C100 variant measures distance within a range of 0,25–10 m with a resolution of 1 mm, making it suitable for monitoring water levels, tanks, wells, sewerage, and other outdoor installations.

The device features an enclosure IP67, a 3-axis accelerometer, an NTC temperature sensor, threshold alarms, and NFC configuration. Two replaceable 9000 mAh ER26500 Li-SOCl₂ batteries provide approximately 10 Years of Operation with TCP/UDP or approximately 5 years with MQTT/AWS under the manufacturer's test conditions. The cellular version also supports GNSS and does not require a LoRaWAN gateway.

Milesight EM400-UDL-N03GL, PN: C050 is a non-contact ultrasonic distance and level sensor with NB-IoT / LTE Cat M1 and GNSS positioning. The C050 variant measures distance within a range of 0,25–5 m, with a resolution of 1 mm and an accuracy of ±(1 + 0,3% × S) cm, making it suitable for monitoring water levels, tanks, wells, sewerage, and other outdoor installations.

The device features an enclosure IP67, a 3-axis accelerometer, an internal NTC temperature sensor, threshold alarms, and NFC configuration. Two replaceable 9000 mAh ER26500 Li-SOCl₂ batteries provide approximately 10 Years of Operation with TCP/UDP or approximately 5 years with MQTT/AWS under the manufacturer's test conditions. The cellular version also supports GNSS and does not require a LoRaWAN gateway.

Milesight AM307-868M is a multi-parameter air quality sensor 7-in-1 with LoRaWAN communication and a 4,2-inch E-Ink display. The device monitors temperature, humidity, CO₂ concentration, TVOC, atmospheric pressure, light intensity, and occupancy using a PIR sensor.

The clear display, air quality indicator, and buzzer provide local information about conditions, while storage for 18 000 records and data retransmission support monitoring continuity. The AM307 can be powered by 4 replaceable 2700 mAh batteries or USB-C 5 V / 1 A and is suitable for offices, schools, hospitals, hotels, and Smart Building systems.

Milesight VS373-868M is a contactless radar fall detection sensor using 4D 60 GHz mmWave radar and AI algorithms. The device enables 24/7 fall detection with manufacturer-declared accuracy of up to 99%, without cameras and without recording images. It also monitors presence, lying position, motionlessness, dwell time, bed presence and breathing motion.

VS373-868M uses LoRaWAN EU868 Class C, 2.4 GHz Wi-Fi and Milesight D2D. It has a local buzzer and multicolor LED, a 60 V / 1 A DO output, memory for 1000 records and an IP65enclosure. The sensor is designed primarily for nursing homes, hospital rooms, accessible bathrooms and other spaces where rapid fall detection is required while preserving user privacy.

Milesight MS-S0424-GF is a PoE switch for automation and industrial infrastructure applications. An Ethernet switch with Power over Ethernet for simultaneous data transmission and power delivery to end devices.

Key data for this variant: poe ports: 24 × 10/100 Mb/s, uplink: 2 × 1000 Mb/s + 2 × SFP 1000 Mb/s, poe budget: 400 W.

Milesight AM308L-868M is a multi-parameter LoRaWAN air quality sensor designed for monitoring indoor conditions. The device measures temperature, humidity, CO₂, TVOC, atmospheric pressure, PM2.5 and PM10, light intensity and occupancy.

Version AM308L does not have a display, making it suitable as a discreet element of a distributed monitoring system. Data can be transmitted via LoRaWAN to a central platform, while local storage enables up to 18 000 measurement records to be saved.

Milesight EM410-RDL-L0CEU is an industrial radar distance and level sensor with direct LTE Cat.1. The 60 GHz millimetre-wave radar enables non-contact measurement of liquids and smooth solid surfaces within a range of 0,3–12 m, with a resolution of 1 mm, a narrow 8° beam, and accuracy reaching ±2 mm under optimal conditions.

The L0CEU version supports a Nano SIM and European LTE bands, so it does not require a LoRaWAN gateway. This variant features an internal antenna and a G 1½" thread. The PVDF enclosure provides an IP68 protection rating, while the 19 000 mAh Li-SOCl₂ battery provides approximately 5 Years of Operation under the manufacturer's test conditions.

Milesight CT310-868M is a wireless LoRaWAN® current transformer designed for RMS current measurement up to 1000 A per measurement channel. The design with openable transformers enables non-invasive installation without disconnecting the conductor and simultaneous monitoring of up to three phases. The device offers ±1% accuracy, 1 mA resolution and sampling at up to 3,3 kHz.

Variant CT310-868M operates in the LoRaWAN® EU868 band, supports OTAA/ABP Class A and can be powered by energy induced directly from the monitored conductor or by 5 V via USB-C. It supports threshold and overrange alarms, optional cable temperature measurement using an NTC sensor and FUOTA updates. The CT310 transformer opening diameter is 51 mm.