Milesight

Milesight CT103-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 250 A in a single conductor. The split-core design enables installation without disconnecting the monitored circuit, while 3,3 kHz sampling makes it possible to capture dynamic load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT103-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced from the monitored conductor or by 5 V via USB-C, and the current version enables regular reporting with self-powering starting from 3 A at a 1-minute interval or 2,8 A at 10 minuteses. The transformer opening has a diameter of 16 mm, and the device supports alarms, optional cable temperature measurement and FUOTA updates.

Milesight CT105-868M is an intelligent LoRaWAN® current transformer designed for wireless RMS current measurement up to 500 A in a single conductor. The split-core design enables installation on an existing installation without disconnecting the conductor, while the 3,3 kHz sampling frequency allows rapid detection of load changes. Accuracy is ±1% for currents above 5 A and ±3% for values up to 5 A, with 1 mA resolution.

Variant CT105-868M operates in the LoRaWAN® EU868 band and supports OTAA/ABP Class A. The device can be powered by energy induced directly from the monitored conductor or by 5 V via USB-C. The current version reports data with self-powering from as low as 5 A at a 1-minute interval or 4,7 A at 10 minuteses, supports threshold and overrange alarms, an optional NTC temperature sensor and FUOTA updates.

Milesight WT303-868M is a smart LoRaWAN thermostat designed to control 2- and 4-pipe FCU fan coil units with 3-speed fans. It supports 2- and 3-wire ON/OFF motorised valves in 2-pipe installations and 2-wire ON/OFF valves in 4-pipe installations.

The WT303 features a 2,7-inch E-Ink display, built-in temperature and humidity measurement, an input for an external NTC sensor, and a digital input for applications such as a hotel key card or reed switch. Local schedules, open-window detection, freeze protection, Milesight D2D, and LoRaWAN Class C communication enable advanced HVAC control systems and BMS integration.

Milesight WT304-868M is a smart LoRaWAN thermostat designed to control 2- and 4-pipe FCU fan coil units. It supports installations with 3-speed and 0–10 V EC fans and, depending on the system configuration, 0–10 V proportional valves and ON/OFF motorised valves.

The thermostat features a 2,7-inch E-Ink display, built-in temperature and humidity measurement, an NTC input, and a digital input for a hotel key card, reed switch, or other dry contact. Local schedules, open-window detection, freeze protection, Milesight D2D, and LoRaWAN Class C enable advanced HVAC control systems and BMS integration.

Milesight WT101-868M is a smart LoRaWAN radiator thermostat designed for precise temperature control in individual rooms. The built-in NTC sensor measures temperature within a range of −20…+60°C, while the stepper motor automatically controls the radiator valve opening level.

The WT101 supports automatic temperature control, direct valve opening control, up to 16 heating plans, open-window detection, freeze protection, and Child Lock. Two replaceable Li-FeS₂ AA batteries provide approximately 8 years of operation at SF7/EU868 under the manufacturer's test conditions.

Milesight WT102-868M is a self-powered smart LoRaWAN radiator thermostat that uses radiator heat energy to power its electronics and valve actuator. Thanks to energy harvesting technology, the device does not require periodic battery replacement or a permanent wired power source.

The WT102 measures temperature within a range of −20…+60°C, automatically controls the valve opening and allows the target temperature to be set within a range of 5…35°C. It supports up to 16 heating plans, open-window detection, freeze protection, storage for 1000 records, LoRaWAN Class B, NFC configuration, and an optional external NTC sensor connected via USB-C.

Milesight WS156-868M is a smart LoRaWAN® scene panel equipped with 6 programmable buttons and 2,9-inch black-and-white E-Ink display 128 × 296 px. Each button can be assigned to a separate scene and operate independently via LoRaWAN® or Milesight D2D, enabling control of lighting, air conditioning, blinds and other compatible automation elements. The display content can be personalised by uploading custom graphics and labels corresponding to specific scenes.

Variant 868M supports, among others, the European EU868 band and operates as a LoRaWAN® OTAA/ABP Class A. WS156 can operate as a Milesight D2D Controller, allowing a single command to be received by multiple D2D Agent devices without using a LoRaWAN® gateway. The panel is powered by 2 replaceable CR2450 590 mAh batteries, and the manufacturer-declared battery life exceeds 3 years under specified test conditions. The compact 86 × 86 × 14 mm enclosure enables mounting with 3M tape, on an 86 mm box, or placing the device on a surface.

Milesight WT201-868M is a smart LoRaWAN thermostat designed to control most HVAC systems powered by 24 V AC, including heat pumps, air conditioning systems, furnaces, boilers, and PTAC units. The device supports heating, cooling, Emergency Heat, Auto mode, and fan control.

The WT201 features a 4,2-inch backlit LCD display, built-in temperature and humidity measurement, a digital input for a hotel key card or reed switch, and storage for 1000 records. LoRaWAN Class C, Milesight D2D, local schedules, freeze protection, Multicast, and FUOTA enable integration of the thermostat with modern Smart Building and BMS systems.

Milesight EM500-SMTC-868M is a wireless LoRaWAN sensor designed for monitoring soil moisture, temperature and electrical conductivity. The MEC20 probe enables continuous assessment of soil conditions in agriculture, horticulture and smart irrigation systems.

Rugged Probe IP68, an IP67 transmitter, LoRaWAN 868 MHz communication and a 19 000 mAh battery enable long-term operation in outdoor installations. The device also supports local measurement storage, threshold alarms, data retransmission and NFC configuration.

Milesight CS0X/CSOX is a solar panel designed to work with compatible Milesight UC50x controllers, particularly variants intended for battery and solar power.

The manufacturer offers pole- and wall-mounting variants. The panel can power an outdoor IoT node without a permanent grid connection, for example in telemetry, agriculture, or infrastructure monitoring.

Milesight S45 is a solar panel module designed to supply power to compatible Milesight cameras in outdoor installations. The manufacturer supplies it with wall- and pole-mounting brackets.

The panel measures 580 × 385 × 69 mm and weighs approximately 4,2 kg. It enables autonomous monitoring points to be built in locations where providing permanent power is costly or difficult.

Milesight UC511-DI-868M is an autonomous LoRaWAN® solenoid-valve controller with internal antenna, designed for smart irrigation, remote flow control and water-consumption monitoring. The device offers 2 outputs for 2-wire 12 V DC latching valves and 2 Dry Contact digital inputs operating as Digital Input or Pulse Counter. The variant 868M supports, among others, EU868, offering transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

UC511 uses built-in 6 V / 1,7 W solar panel and 2 rechargeable ICR18650 batteries with a capacity of 2550 mAh each, enabling operation without a permanent power connection. Support for LoRaWAN® Class A, B and C, Milesight D2D, multicast, local rules and NFC configuration enables autonomous control systems to be built. The enclosure IP68, operating temperature −20…+60°C and wall or pole mounting allow the device to be used in year-round field installations.

Milesight UC512-DI-868M is a battery-powered LoRaWAN® solenoid-valve controller with internal antenna, designed for smart irrigation, remote flow control and water-consumption monitoring. The device offers 2 outputs for 2-wire 12 V DC latching valves and 2 Dry Contact digital inputs, which can operate as Digital Input or Pulse Counter. The variant 868M supports, among others, the European EU868 band, offering transmit power up to 16 dBm and receiver sensitivity down to −137 dBmfunction.

The controller is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each, providing, according to the manufacturer, more than 10 years of operation in LoRaWAN® Class A mode under specified test conditions. Support for OTAA/ABP, Class A and Class B, local rules, multicast, schedules and NFC configuration allows autonomous irrigation systems to operate even during temporary loss of network communication. The enclosure IP68, temperature range −30…+70°C and compact dimensions of 116 × 116 × 45,5 mm enable year-round operation in outdoor installations.

Milesight UC512-DI-868M, PN: EA is a battery-powered LoRaWAN® solenoid-valve controller designed for irrigation automation and remote water-flow monitoring. The variant 868M supports the EU868, IN865 and RU864 bands, while the EA version has an external antenna connector SMA 50 Ω. The device offers 2 outputs for controlling 2-wire 12 V DC latching valves and 2 digital inputs operating as Digital Input or pulse counter, enabling operation with pulse water meters, among other devices.

UC512 is powered by 3 replaceable ER26500 Li-SOCl₂ batteries with a capacity of 9000 mAh each, providing, according to manufacturer data, more than 10 years of operation in LoRaWAN® Class A mode under specified test conditions. The controller supports OTAA/ABP Class A and Class B, NFC configuration, local rules and multicast. The sealed enclosure IP68, temperature range −30…+70°C and wall or pole mounting enable the device to be used in year-round outdoor installations.

Milesight WS302-868M is a wireless LoRaWAN sound level sensor designed for monitoring acoustic conditions in offices, schools, hotels, hospitals, and other indoor spaces. The device measures sound levels within a range of 30–120 dBA and 35–120 dBC, with an accuracy of ±3 dB and a resolution of 0,1 dB.

The WS302 supports A- and C-frequency weighting, Fast time weighting, and SPL Actual, Leq, and Lmax values. The built-in LED indicator can signal when a defined threshold is exceeded, while LoRaWAN 868 MHz communication enables remote monitoring without recording the content of conversations.

Milesight EM300-SLD-868M is a point LoRaWAN leak sensor designed for rapid detection of water and other conductive liquids. The external probe connected by a cable with a length of 1,5 m responds when the liquid reaches a level of approximately 5 mm.

The device also measures temperature from −30 to +70°C and humidity from 0–100% RH. The IP67 enclosure, storage for 2800 records, data retransmission, Milesight D2D, and a replaceable 4000 mAh battery enable long-term monitoring of server rooms, technical rooms, water installations, basements, and other areas at risk of flooding.

Milesight EM500-SWL-868M, PN: L003-4846W is a submersible LoRaWAN EU868 water level sensor with a measurement range of 0–3 m H₂O. The hydrostatic vented-gauge probe measures liquid level with an accuracy of ±0,5% FS and a resolution of 0,01 m, making the device suitable for tanks, wells, rivers, canals, and water management systems.

The EM500-SWL features a transmitter enclosure IP67 and a submersible probe IP68. The 19 000 mAh Li-SOCl₂ battery provides up to 10 years of operation under specified test conditions, while memory for 1000 Records, data retransmission, threshold alarms, and NFC configuration support reliable remote water level monitoring.

Milesight SP13-125-150 is an external probe for simultaneous measurement of temperature and relative humidity, designed to work with Milesight TS602 and TS301 V2 / TS302 V2 sensors. The temperature measurement range is −40…125°C, and the humidity range is 0…100% RH. Temperature accuracy reaches ±0,2°C within 0…65°C, while humidity measurement accuracy is ±2% RH.

The probe has a PVC cable with a length of 1,5 m and a straight 304 stainless steel measuring tip with dimensions Ø6 × 50 mm and an IP67 protection rating. The SP13-125-150 is suitable for applications including cold rooms, chambers, warehouses, refrigerated transport, and other installations requiring temperature and humidity monitoring at a point remote from the main device.

Milesight EM300-TH-868M is a wireless LoRaWAN temperature and humidity sensor designed for monitoring environmental conditions inside and outside buildings. The device measures temperature within a range of −30…+70°C and humidity 0–100% RH.

Sealed Enclosure IP67 with UV resistance, storage for 2800 records, data retransmission, and Milesight D2D make the EM300-TH suitable for warehouses, greenhouses, industrial plants, and Smart Building systems. The device is supplied as standard with a replaceable 4000 mAh battery, while an increased-capacity 8000 mAh version is also available.

Milesight EM320-TH-868M is a wireless LoRaWAN temperature and humidity sensor designed for monitoring conditions in buildings, warehouses, industrial plants, greenhouses, and other facilities. The device measures temperature within a range of −30…+60°C and humidity 0–100% RH, achieving a typical accuracy of up to ±0,2°C and ±2% RH.

Enclosure IP67, storage for 3000 records, data retransmission, NFC configuration, and two replaceable 2700 mAh batteries enable many years of independent operation. The standard EM320-TH version is designed for wall or pole mounting and complies with EN12830.

Milesight TS201-868M PN: TH is a compact LoRaWAN temperature and humidity sensor equipped with an external detachable TH probe. The device measures temperature within a range of −40…+125°C and humidity 0–100% RHmaking it suitable for cold storage facilities, warehouses, pharmaceuticals, the food industry, and other applications requiring continuous condition monitoring.

The TS201 features an enclosure rated IP67storage for 4000 records, threshold alarms and rapid-change alarms, data retransmission, LoRaWAN 868 MHz communication, and Milesight D2D. In the TH version, the 2700 mAh battery provides up to approximately 9 years of operation at SF7/EU868 and a 10-minute reporting interval.

Milesight TS601-L0DEU is a compact temperature and humidity data logger with LTE Cat.1designed primarily for cold-chain monitoring during transport and storage of food, medicines, and other sensitive products. The built-in sensor measures temperature within a range of −35…+70°C and humidity from 0–100% RH.

The device does not require a LoRaWAN gateway — data is transmitted directly through the cellular network. The TS601 features an IP67 enclosure, storage for 5000 records, a light sensor for detecting opening of the cargo space, a 3-axis tilt sensor, cellular network-based positioning, and LED status and alarm indication.

Milesight EM320-TH-868M PN: Magnet is a wireless LoRaWAN temperature and humidity sensor with magnetic mounting, designed for applications including cold storage facilities, refrigerators, food warehouses, and pharmaceutical storage. The device measures temperature within a range of −30…+60°C and humidity 0–100% RH, achieving a typical accuracy of up to ±0,2°C and ±2% RH.

Enclosure IP67 made of Food Grade material, compliance with EN12830, storage for 3000 records, and data retransmission make the EM320-TH suitable for demanding storage condition monitoring systems. Two replaceable 2700 mAh batteries provide more than 10 years of operation under the manufacturer's test conditions.

Milesight TS602-L0DEU is an industrial 4G LTE data logger designed for monitoring temperature and humidity during storage and transport of products requiring controlled conditions. The device works with interchangeable probes PT100, DS18B20, and temperature and humidityallowing the measurement range to be selected for a specific application.

The TS602 features a 0,96" OLED display, storage for 5000 records, light and tilt sensors, base-station positioning, and an IP67 enclosure. Data is transmitted directly via LTE Cat.1 using TCP, UDP, MQTT, AWS, or Milesight Development Platform, without the need for a LoRaWAN gateway.