Milesight

Milesight SP13-125-150 is an external probe for simultaneous measurement of temperature and relative humidity, designed to work with Milesight TS602 and TS301 V2 / TS302 V2 sensors. The temperature measurement range is −40…125°C, and the humidity range is 0…100% RH. Temperature accuracy reaches ±0,2°C within 0…65°C, while humidity measurement accuracy is ±2% RH.

The probe has a PVC cable with a length of 1,5 m and a straight 304 stainless steel measuring tip with dimensions Ø6 × 50 mm and an IP67 protection rating. The SP13-125-150 is suitable for applications including cold rooms, chambers, warehouses, refrigerated transport, and other installations requiring temperature and humidity monitoring at a point remote from the main device.

Milesight VA21 is a special identification lanyard designed for use with people counters from the VS125series. The distinctive lanyard pattern can be recognized by the Staff Detectionfunction, allowing staff passages to be automatically excluded from visitor statistics.

VA21 is made of polyester, worn around the neck and available in red-and-white and black-and-whitevariants. The solution preserves staff anonymity — it does not require registration of personal data, biometric identifiers or facial recognition. A VS125 counter with firmware V1.0.2 or later.

Milesight SS21 PN03-150 is a magnetic reed switch sensor designed to detect the opening and closing of doors, covers, or other movable elements when used with Milesight TS301 and TS302 devices. The sensor consists of two magnetic elements measuring 31 × 14 × 7,5 mm, and its detection distance is approximately 20–30 mm.

The SS21 PN03-150 features a 1,5 m cable and can be mounted using screws or 3M tape. When connected to the TS301 or TS302, it enables the open/closed state to be recorded and information to be transmitted through the LoRaWAN system of the main device. With the TS302, a PT100 temperature probe and the SS21 magnetic sensor can be used simultaneously.

Milesight VC01 is a flush-mount cover designed for people counters Milesight VS125 / VS125-LW. It enables the device to be installed neatly in a suspended ceiling, so the sensor enclosure remains nearly flush with the ceiling surface and has less visual impact on the interior.

VC01 is made from durable plastic PC + ABS resistant to environmental ageing. The cover has a diameter of 210 mm, a height of 40 mm, and weighs approximately 130 g. It is available in white or black and is supplied with the mounting components required for installation.

Milesight VA31 is a special reflective lanyard enabling people counters from the VS13x series to automatically recognize staff and exclude employees from customer-traffic statistics. The solution works anonymously, without identifying a specific person and without requiring electronic devices or power.

The set contains 8 VA31 lanyards. The accessory works, among other devices, with VS133 from firmware 1.0.2 and VS135 from firmware 1.0.5-r2. The lanyard is made of reflective polyester and should remain clearly visible around the employee’s neck during use.

Milesight TRA3015 is a valve adapter set designed for the Milesight WT101 smart radiator thermostat. It allows the thermostat to be installed on popular valves that do not use the standard M30 × 1,5 mm connection.

The set extends WT101 compatibility to Danfoss RA, RAV and RAVL, Giacomini GIA, and M28 × 1,5 mm valves used by manufacturers including Comap, Herz, and TA. The adapters make it possible to use one thermostat model in installations equipped with different types of radiator valves.

Milesight SP11 B05-125-200 is a standard temperature probe Class B PT100 designed to work with Milesight TS301, TS302 and TS602 devices. The measurement range is −40…125°C, with a typical accuracy of ±0,5°C within −40…40°C and ±1°C for temperatures from 40…125°C. The probe is suitable for monitoring cold rooms, warehouses, pharmaceutical and food applications, and other installations requiring an external temperature measurement point.

The measuring tip is made of 304 stainless steel measures Ø4 × 50 mm and has an IP67 protection rating. SP11 B05-125-200 features a 2 m PVC cable and can be used for contact measurement or together with the optional Milesight TB3984 buffer bottle, which stabilises measurements in refrigeration and cold-chain applications.

Milesight SP12-125-150 is an external digital temperature probe DS18B20 designed for independent calibration and operation with Milesight TS201, TS602 and TS301 V2 / TS302 V2 devices. The measurement range is −40…125°C, while according to the manufacturer's current datasheet the accuracy is ±0,5°C within −10…85°C and ±2°C outside this range.

The probe has a PVC cable with a length of 1,5 m and a straight 316 stainless steel measuring tip with dimensions Ø6 × 50 mm and an IP67 protection rating. The SP12-125-150 is designed exclusively for temperature measurement and is suitable for applications including cold rooms, refrigerated transport, warehouses, pharmaceuticals, and industrial process monitoring.

Milesight VB02 is an adjustable ceiling bracket designed for mounting compatible Milesight people counters. The articulated design enables device tilt through 90° and 360° rotation, allowing the sensor operating direction to be precisely set even when standard mounting parallel to the ceiling does not provide the required detection field.

The bracket is made of lightweight, corrosion-resistant aluminium, and the standard threaded interface 1/4 inch simplifies installation of a compatible device. VB02 is designed for models VS125 Series, VS135 Series and VS126, is white and weighs approximately 93 g.