Split-core current transformer RCT-RJ11 (0–100 A) for CTH01
Vendors's code:
Product code: RCT-100
Barcode:
Code 39:
ISBN:
Milesight RCT-100 is a split-core current transformer of the split-core type designed for use with the CTH01 Smart Power Monitor Hub. It enables non-invasive current measurement in the range 0–100 A with accuracy class 0.5. The split core allows the transformer to be installed directly around an existing conductor without cutting or disconnecting it.
RCT-100 connects to one of the CTH01 current inputs via RJ11. The transformer has a conductor opening of Ø16 mm, operates at −40…+55°C, withstands an insulation voltage of 3 kV AC and uses material with flammability class UL94 V0.
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Opis
Produkty powiązane
RCT-100 — 0–100 A split-core current transformer for Milesight CTH01
Milesight RCT-100 is a split-core current transformer designed for use with the multi-channel CTH01 Smart Power Monitor Hub.
The transformer enables AC current measurement from 0 to 100 A and sends the measurement signal to one of the CTH01 current inputs.
The opening-core design enables installation around an existing conductor without cutting it and without rebuilding the electrical installation.
100 A, class 0.5 and fast split-core installation
0–100 A
Measurement range designed for monitoring circuits with current up to 100 A.
Class 0.5
Precision transformer intended for energy and electrical parameter monitoring systems.
Split-Core
The opening core enables installation around an existing conductor without disconnecting it.
Monitoring energy and circuit load
Current transformer up to 100 A
RCT-100 is the lowest-current variant in the family of split-core transformers designed for CTH01.
The 0–100 A range is primarily suitable for monitoring load circuits, devices, sub-distribution boards and other lines whose maximum current does not exceed 100 A.
Installation without cutting the conductor
The opening split-core design allows the transformer core to be opened, placed around the monitored conductor and closed again.
There is no need to route the conductor through a closed transformer core, significantly simplifying installation in existing distribution boards.
Conductor with a diameter up to approximately 16 mm
Dedicated transformer for the 12-channel energy monitor
RCT-100 is designed for use with the Milesight CTH01 Smart Power Monitor Hub.
CTH01 has 12 RJ11 current inputs and allows individual channels to be configured independently for single-phase and three-phase circuits.
One CTH01 can support up to 12 single-phase circuits, up to 4 three-phase circuits, or a mixed configuration.
Ability to combine different CT ranges
CTH01 supports split-core current transformers with ranges of 100 A, 300 A, 500 A and 1000 A.
Individual channels can use transformers with different ranges, allowing the system to be matched to the actual loads of the monitored circuits.
3 kV AC insulation and UL94 V0 enclosure
Designed for operation in distribution boards and industrial installations
RCT-100 is a passive component of the CTH01 system
RCT-100 itself does not have LoRaWAN communication, data memory or a user interface.
The transformer measures current, while CTH01 processes the electrical data, performs calculations and transmits the results to the higher-level system.
Key parameters of RCT-100
RCT-100 in an energy monitoring system
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
-
Gross price $492.00incl. %s VATNet price $400.00without 23% VAT
Split-core current transformer RCT-RJ11 (0–100 A) for CTH01
Nowości
-
Gross price $270.60incl. %s VATNet price $220.00without 23% VAT
