Schneider

PFXSP5400WADF0C is an Pro-face SP5000 display module with a diagonal of 7,0″, resolution 800 × 480 (WVGA) and a touch panel of type analogue resistive.

SP5000 has a modular architecture: the display module works with the appropriate Box Module (e.g. Open Box, Power Box or Standard Box depending on the application). This item covers the display module — the Box unit is selected separately.

PFXXM4300TP is an 5,7″ display module designed for modular Pro-face LT4000M / GP4000M panels.

This item covers the display section and is not a complete HMI panel. It is used when assembling a new device or as a compatible service component with the appropriate rear module.

PFXFP5700TPD is an industrial flat-panel monitor Pro-face FP5000 with a diagonal of 15,0″, resolution 1024 × 768 (XGA) and a touch interface of type multi-touch.

The device acts as an external operator monitor and requires a video source from a computer or supervisory device. The variant is powered by 24 V DC.

PFXSP5700TPDF5C is an Pro-face SP5000 display module with a diagonal of 15,0″, resolution 1024 × 768 (XGA) and a touch panel of type analogue resistive, multi-touch.

SP5000 has a modular architecture: the display module works with the appropriate Box Module (e.g. Open Box, Power Box or Standard Box depending on the application). This item covers the display module — the Box unit is selected separately.

PFXSP5600TPDF5C is an Pro-face SP5000 display module with a diagonal of 12,1″, resolution 1024 × 768 (XGA) and a touch panel of type analogue resistive, multi-touch.

SP5000 has a modular architecture: the display module works with the appropriate Box Module (e.g. Open Box, Power Box or Standard Box depending on the application). This item covers the display module — the Box unit is selected separately.

PFXSP5600TPDF5 is an Pro-face SP5000 display module with a diagonal of 12,1″, resolution 1024 × 768 (XGA) and a touch panel of type analogue resistive, multi-touch.

SP5000 has a modular architecture: the display module works with the appropriate Box Module (e.g. Open Box, Power Box or Standard Box depending on the application). This item covers the display module — the Box unit is selected separately.

PFXSP5600TPDF0C is an Pro-face SP5000 display module with a diagonal of 12,1″, resolution 1024 × 768 (XGA) and a touch panel of type analogue resistive, multi-touch.

SP5000 has a modular architecture: the display module works with the appropriate Box Module (e.g. Open Box, Power Box or Standard Box depending on the application). This item covers the display module — the Box unit is selected separately.

PFXSP5600TPDF1 is an Pro-face SP5000 display module with a diagonal of 12,1″, resolution 1024 × 768 (XGA) and a touch panel of type analogue resistive, multi-touch.

SP5000 has a modular architecture: the display module works with the appropriate Box Module (e.g. Open Box, Power Box or Standard Box depending on the application). This item covers the display module — the Box unit is selected separately.

PFXFP5600TPD is an industrial flat-panel monitor Pro-face FP5000 with a diagonal of 12,1″, resolution 1024 × 768 (XGA) and a touch interface of type multi-touch.

The device acts as an external operator monitor and requires a video source from a computer or supervisory device. The variant is powered by 24 V DC.

PFXSP5500TPDF0C is an Pro-face SP5000 display module with a diagonal of 10,4″, resolution 800 × 600 (SVGA) and a touch panel of type analogue resistive, multi-touch.

SP5000 has a modular architecture: the display module works with the appropriate Box Module (e.g. Open Box, Power Box or Standard Box depending on the application). This item covers the display module — the Box unit is selected separately.

Pro-face PFXZCDADEXP1 is a DC power adapter designed for SP5000 Series Box Modules. It enables powering the Box Module independently of the Display Module, allowing the computing unit to operate independently or be installed in a different location from the operator display. The adapter supports 12–24 V DC power and is designed for DIN-rail mounting.

The PFXZCDADEXP1 is additionally equipped with 1× Ethernet 10/100 Mb/s RJ45 and a status LED. The adapter itself consumes a maximum of 2 W. The accessory works with SP5000 Box Modules, including Standard Box, Power Box and Open Box, and with the optional PFXZSPADWM1 bracket it can also be mounted on the wall of a control cabinet.

Pro-face PFXSP5B10F0C is an industrial SP5000 Series Power Box in Coated Version, designed for building high-performance HMI operator panels with a real-time operating system. The module uses a ARM Cortex-A9, 1 GB of device memory, system and working SD memory, and 512 kB of NVRAM. It offers 2× Gigabit Ethernet, 2× COM RS-232C/RS-422/RS-485, 2× USB 2.0 Type-A, USB mini-B and audio/AUX output.

Variant F0C features a factory-applied protective coating on the electronics, increasing corrosion resistance in demanding industrial environments. PFXSP5B10F0C works with compatible SP5000 Display Modules from 7″ Wide to 19″ Wide, except SP-5660TP. The module is powered by 12 V DC from the Display Module, consumes a maximum of 25 W and can be programmed using GP-Pro EX or BLUE.

PFXWRT100A is a licence BOS Web Viewer Runtime covering 100 licences. It is used to run web-based viewing of applications prepared in the BLUE Open Studio environment.

The variant is intended for scaling access to visualisation through a browser or Web Viewer component according to the project architecture. The number of licences follows directly from the product code.

PFXWRT010A is a licence BOS Web Viewer Runtime covering 10 licences. It is used to run web-based viewing of applications prepared in the BLUE Open Studio environment.

The variant is intended for scaling access to visualisation through a browser or Web Viewer component according to the project architecture. The number of licences follows directly from the product code.

PFXWRT001A is a licence BOS Web Viewer Runtime covering 1 licence. It is used to run web-based viewing of applications prepared in the BLUE Open Studio environment.

The variant is intended for scaling access to visualisation through a browser or Web Viewer component according to the project architecture. The number of licences follows directly from the product code.

PFXBLUERT1P is a runtime licence for Pro-face BLUE in the Runtime edition. The variant includes 1 workstation and has a licence term of perpetual.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP10SY is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 10 workstations and has a licence term of 12 months.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP10P is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 10 workstations and has a licence term of perpetual.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP1SY is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 1 workstation and has a licence term of 12 months.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP1SM is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 1 workstation and has a licence term of 1 month.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP1P is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 1 workstation and has a licence term of perpetual.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP3SY is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 3 workstations and has a licence term of 12 months.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP3P is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 3 workstations and has a licence term of perpetual.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.

PFXBLUEBTP100SY is a build-time licence for Pro-face BLUE in the Professional edition. The variant includes 100 workstations and has a licence term of 12 months.

BLUE software is used to create and run HMI visualisations in the Pro-face ecosystem. The exact licence variant allows the scope to be matched to a single workstation or team use without purchasing more licences than required.