Pro-face PFXSP5B90 (SP-5B90 eXtreme Box) is an SP5000X Series HMI base module designed for use with eXtreme Display screens. The module uses an ARM Cortex-A8 processor, offers 1 GB of device memory, and extensive communication interfaces: 2× Ethernet 10/100/1000 Mb/s, 2× RS-232C/422/485 serial ports, USB and two SD card slots. The modular design allows the computing section to be separated from the operator panel.
PFXSP5B90 is designed for industrial and outdoor applications requiring increased environmental resistance. The module is powered by 12 V DC, consumes a maximum of 20 W, supports GP-Pro EX and BLUE, and can be expanded with a Fieldbus module. A speaker output and AUX are also available for alarm signalling or buzzer control.
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Opis
Produkty powiązane
Pro-face PFXSP5B90 — eXtreme Box for Modular Operator Panels
Pro-face PFXSP5B90, also designated SP-5B90 eXtreme Box, is an industrial SP5000X Series HMI base module designed for use with eXtreme Display Modules.
The SP5000X Series architecture separates the operator display from the computing section. This allows the Box Module to be connected to a corresponding SP5000X display, creating a complete HMI panel tailored to the application.
PFXSP5B90 provides extensive industrial communication, SD memory support, USB ports, and expansion with a Fieldbus module. It is designed for applications requiring high reliability and operation in more demanding industrial conditions.
Modular Design and Extensive Communication
2× Gigabit Ethernet
Two independent RJ45 ports support 10BASE-T, 100BASE-TX and 1000BASE-T communication.
2× COM
Two serial ports can operate as RS-232C, RS-422 or RS-485.
Modularity
The Box unit can work with SP5000X Series eXtreme Display screens.
HMI for Machines and Industrial Installations
Box Module + eXtreme Display
The SP5000X Series is designed as a modular system consisting of a Box Module and a separate Display Module.
PFXSP5B90 contains the computing section, memory, and communication interfaces, while the display provides local visualisation and operator interaction.
The manufacturer confirms that the eXtreme Box can work with eXtreme Display screens belonging to the SP5000X Series.
ARM Cortex-A8 and 1 GB Device Memory
Two Gigabit Ethernet Ports
PFXSP5B90 features two independent RJ45 Ethernet ports.
The interfaces support IEEE 802.3i, IEEE 802.3u and IEEE 802.3ab as well as 10BASE-T, 100BASE-TX and 1000BASE-T.
Two network interfaces make it easier to separate communication between different segments of the automation infrastructure.
2× RS-232C / RS-422 / RS-485
The module has two serial interfaces COM1 i COM2.
Each can operate as RS-232C, RS-422 or RS-485 and uses a 9-pin D-Sub connector.
The standard transmission speed range is 2400 to 115 200 bit/s.
USB Type-A and mini-B
Two Independent Memory Slots
PFXSP5B90 features two SD card slots.
One is intended for the system card and the other for data storage.
Separating system and storage memory simplifies HMI project management and the recording of operating data.
Fieldbus Unit Support
The module has an expansion interface intended for Fieldbus units.
The manufacturer specifies expansion support for standards such as PROFIBUS, CANopen, J1939 and FLEX NETWORK, depending on the module used.
Speaker Output and Alarm Signalling
PFXSP5B90 has an audio output for driving an external speaker.
Speaker output power is at least 300 mW at an 8 Ω load.
The AUX interface can be used as an alarm output or buzzer output with a rated voltage of 24 V DC and current up to 50 mA.
GP-Pro EX and BLUE
PFXSP5B90 is supported by the engineering environments GP-Pro EX and BLUE.
For GP-Pro EX, the manufacturer specifies model support from version 4.08.200.
The software enables creation of operator visualisations, communication with automation devices, and panel logic functions.
12 V DC and Power Consumption up to 20 W
The rated module voltage is 12 V DC.
Power can be supplied from a compatible Display Module or via a suitable power adapter intended for the Box Module.
The maximum power consumption is 20 W.
Design Prepared for Industrial Applications
Compact Base Module
For Industrial Applications Across Multiple Markets
The current manufacturer data sheet lists certifications including UL, cUL, CE, UKCA, KC, RCM, EAC, ATEX and IECEx.
The product also meets standards for industrial control equipment and Class I Division 2 applications.
Key Parameters of Pro-face PFXSP5B90
PFXSP5B90 as the Central Operator-Panel Module
Pro-face PFXSP5B90
Nowości
-
Gross price $270.60incl. %s VATNet price $220.00without 23% VAT
