Pro-face PSA6000 iPC 19" widescreen, Core i5

Pro-face classifies PFXPSA65GD18W11 as a model 19″ Wide. The actual diagonal of the TFT LCD panel is 18,5″.

Resolution 1920 × 1080 px Full HD and a 16:9 aspect ratio enable clear presentation of advanced synoptic screens, alarms, trends, and process data.

The active display area measures approximately 408,96 × 230,04 mm, and the screen supports 16 million colours.

The display uses industrial white LED backlight.

The manufacturer specifies a backlight lifetime of at least 50 000 hours of continuous operation at 25°C until brightness drops to 50% of its initial value.

Brightness can be adjusted by software within the range 0–100.

PFXPSA65GD18W11 uses Projected Capacitive Touch, providing precise and smooth operation of the operator interface.

The screen supports Multi-Touch with two simultaneous touch points.

The touchscreen resolution is 2048 × 2048, and the declared durability is at least 50 million operations.

Cyfra 5 in the eighth position of the catalogue number identifies a PSA6000 variant equipped with an Intel Core i5 processor.

PFXPSA65GD18W11 uses Intel Core i5-1345UE with a hybrid architecture comprising 2 Performance cores and 8 Efficient cores.

In total, the processor offers 10 cores and 12 threads. The base frequency is 1,40 GHz, while Turbo Boost reaches up to 4,60 GHz for P-Cores and 3,40 GHz for E-Cores.

PFXPSA65GD18W11 is factory-equipped with 8 GB DDR5 memory.

The Core i5 platform uses DDR5 memory operating at up to 5200 MHz.

Graphics memory is shared with main memory in the UMA architecture.

The PFXPSA65GD18W11 code identifies the configuration with a factory-installed 128 GB M.2 SATA SSD.

The main SSD1 slot of the Core i5 platform supports both M.2 SATA and PCIe, and the device also has second SSD2 slot.

This allows device storage to be expanded according to application requirements and manufacturer-specified compatibility.

Tip W11 indicates a factory-installed system Windows 11 IoT Enterprise 2024 LTSC 64-bit.

The system enables the use of modern HMI and SCADA applications, service tools, databases, and software for local data processing and analysis.

The more powerful Core i5 processor also allows the device to be used in applications requiring multiple industrial services and programs to run simultaneously.

PFXPSA65GD18W11 is on the current list of PSA6000 devices supported by GP-Pro EX.

The manufacturer specifies compatibility from GP-Pro EX Ver. 5.01.000.

When operating as a WinGP workstation, the required software and licences must be selected appropriately for the specific application.

PFXPSA65GD18W11 features 3 independent RJ45 Ethernet interfaces.

All ports support 10BASE-T, 100BASE-TX and 1000BASE-T.

The three physical interfaces allow separate connections to be assigned to automation devices, plant infrastructure, and a supervisory system or another network segment.

PSA6000 retains two classic serial interfaces used in industrial automation.

COM1 supports RS-232C, while COM2 operates as RS-422 or RS-485.

Both ports are non-isolated, use 9-pin D-Sub connectors, and support transmission speeds of 2400–115200 bit/s.

The panel has a total of 4 USB Type-A ports.

Two use the standard USB 3.1 Gen1, while the other two are USB 2.0.

The ports allow compatible storage devices, service devices, and other peripherals required at the operator workstation to be connected.

PFXPSA65GD18W11 features DisplayPort 1.2 Dual Mode DP++.

The interface can support video up to a resolution of 4096 × 2304 px at 60 Hz.

This allows the workstation to be expanded with an additional external monitor independently of the built-in Full HD display.

PSA6000 has additional expansion options available under the service cover.

In addition to the second SSD slot, there is slot M.2 Key E Type 2230 using a PCIe/USB 2.0 interface.

This allows the computer configuration to be adapted to additional communication and hardware requirements according to the Pro-face compatible expansion list.

The PSA6000 platform features a hardware TPM 2.0 module and UEFI BIOS.

TPM can work with Windows 11 security features and data-protection mechanisms used in industrial IT/OT environments.

This is an important feature in systems where the Panel PC communicates with both the automation layer and the enterprise network.

PFXPSA65GD18W11 can be mounted directly in a cabinet door, operator console, or machine enclosure.

The required mounting cut-out dimensions are 449,5 × 279,5 mm with a tolerance of +1/−0 mm.

The manufacturer also provides for VESA mounting, allowing the device to be used on a suitable industrial arm or bracket.

When correctly installed in a suitable enclosure, the front of the device provides IP66 protection rating.

This allows the panel to be used in industrial environments requiring protection of the operator section against dust and water jets.

The rear of the computer has a protection rating of IP20.

PFXPSA65GD18W11 is designed to be powered directly from a standard automation power system 24 V DC.

The maximum power consumption of this exact variant is 60 W.

The manufacturer specifies a maximum inrush current of 30 A.

PSA6000 uses natural air circulation instead of active fan cooling.

The current product data sheet specifies the operating temperature as 0…50°C with an airflow of 0,6 m/s.

The storage temperature is −20…60°C, and the permissible operating altitude is up to 2000 m.

PFXPSA65GD18W11 belongs to the higher-performance PSA6000 group using Intel Core i5-1345UE.

The PFXPSA6AED18W11, PFXPSA6A7D18W11 and PFXPSA6AFD18W11 variants use the Intel Atom X7425E processor, while PFXPSA65GD18W11 offers a significantly more powerful 10-core architecture.

The model is therefore intended for applications where more intensive data processing or simultaneous operation of multiple Windows applications is required in addition to standard HMI visualisation.